Guess the specs of your upgrades thread

Discussion in 'Gun Building, Modifications & Repairs' started by LegacyAirsoft, Nov 23, 2012.

  1. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    This thread is to help all those people who are new techs to airsoft guns or are attempting an unfamiliar build. For example, people will post the parts they are getting and someone else that has experience with those parts will tell them their guess on fps/rps etc. Or you can post a build that you know the specs of and others can try to guess what they are :)
     
    Last edited: Nov 23, 2012
  2. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    For example:

    Here's my gb plan:
    Shim
    Grease
    AOE correction
    Lonex red motor
    Guarder sp110 spring
    9.6v 1600mah battery
    Wire to deans
    Matrix 16:1 gears
    APS o-ring air nozzle
    Matrix steel reinforced spring guide
    Swiss cheese piston
    Lonex POM-15 piston head
    455mm 6.03 madbul tightbore barrel
    Systema hopup bucking
    16ga wiring
    NanoFet MOSFET
    Everything else is stock DBoys 7mm gb parts

    What do you guys think the...
    -fps will be?
    -rps will be?
    -pre-engagement risk?
    Any easy adjustments I should make?
     
    Last edited: Nov 23, 2012

  3. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    We got one right down the thread line in my tech builds diary. A huge variety of builds with every single internal part. Even have pics. And all specs

    You'd have to be more detailed in the parts you are using. What brand exactly would be a good start.

    We can get a basic idea. But 1 part could mean the difference of 50 fps or 5-10 bps for example.

    Just giving a heads up to you man :) that's all lol.
     
  4. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    Barrel length? Tightbore or stock?

    What kind of piston? Unless its stock.

    Spec of your 9.6v battery.

    In general, a guarder sp110 spring will put you in the 350-360 fps range.

    All the small stuff lol :)
     
  5. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    455mm 6.03 madbul barrel
    9.6v 1600mah NiMh
    Piston is stock but it has a Lonex POM-15 head on it
     
  6. IHOP

    IHOP New Member

    5,426
    2
    Rockton
    I'll play along. Since I first read it as a game, I'll post one I already know. You might too. If you do already know, don't ruin the "fun".

    A&K Masada
    GE/CH gearset (18:1)
    G&P M120 motor
    Deans
    Shimmed
    AOE
    Compression mods
    Stock unless listed otherwise.

    ROF using Turnigy 7.4v 1600mah 30c lipo and AngelPower 11.1v 2200mah 40c lipo.
     
  7. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    Turningy 7.4v = 20rps
    AngelPower 11.1v = 27rps
    Am I anywhere close? Lol
     
  8. deathmechanic

    deathmechanic Active Member

    4,038
    1
    Davis

    It doesn't work due to whats in bold. :p
     
  9. Axis

    Axis New Member Supporting Member

    1,796
    0
    Agreed. Get him a Lonex A1 ASAP! :D
     
  10. IHOP

    IHOP New Member

    5,426
    2
    Rockton
    Yeah. Ill take your Lonex motor.

    The G&P was just so I could get it running. If I were keeping it I'd switch it out.
     
  11. DadCRO

    DadCRO New Member

    646
    0
    I don't know the specs, but here's a build:

    KJW M700 (629mm barrel, gas powered BAR)
    King Arms hopup bucking
    Angel Custom 6.01mm barrel

    For the purpose of the thread, let's say that it's 80 degrees.
     
    Last edited: Nov 24, 2012
  12. blue2014

    blue2014 New Member

    257
    0
    Other factors come in to play, like air tempature.
     
  13. Lefse

    Lefse Well-Known Member Supporting Member

    4,749
    163
    I'm guesstimating 25ish rps, with poor trigger response, get a li-po asap. 300-400fps, as I have no idea how knowledgeable you are about compression. I doubt you'll get PME, unless the piston is super heavy and have lots of friction.
     
  14. 1striker

    1striker New Member

    270
    0
    Boonsboro
    Ok here's one from my current hk416 build
    Madbull ver. 2 6.03 300mm
    G&G m130 spring
    Tenergy 9.6 4200 mah
    Jg m42 motor (this was recommended to me instead of a lonex motor by someone on the forum)
    Bravo steel spring guide
    Shs nylon fiber piston
    Shs 13:1 gear set
    R hop
    MOSFET
    And maybe some airseal mod involving some Teflon tape

    Thanks
    Range?
    Fps?
    Rps?
    Reliability?
    Suggestions?
     
    Last edited: Nov 24, 2012
  15. Axis

    Axis New Member Supporting Member

    1,796
    0
    Okay. I suppose I'll give this a go. :)

    Lonex A1 TITAN (G&G Pinion)
    SHS M130 (Irregular pitch)
    SHS 13:1 gears
    Lonex Compression Set Level III (POM piston head, ported cylinder, air seal nozzle, cylinder head. I get 100% compression)
    Lonex blue piston
    R-Hop
    M-Nub
    Lonex soft bucking
    Barrel Lock Down kit
    3/16 70D Sorbo Pad
    Basic mircrofet
    11.1v 2000 MaH 15C LiPo
    Prometheus 363mm 6.03 TBB

    And now for the modifications.

    Swiss cheesing piston
    Wiring to Deans (Using legit Deans)
    AOE
    Shimming (With SHS shimming set)

    I don't need to be getting 16 gauge wiring because I'm getting a G&P Magpul MOE Carbine.

    RoF?
    FPS?
    GB durability? (1-10, your opinion)
    Range?
     
    Last edited: Nov 25, 2012
  16. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    My guesses:
    Range ~ 300ft
    Fps ~ 450
    Rps ~ 30ish
    Reliability = you should be fine :)
     
  17. Axis

    Axis New Member Supporting Member

    1,796
    0
    My setup is forever alone. ;(
     
  18. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    Ill guess ;)
    Fps ~ 470
    Rps ~29
    Range ~ 250ft
    Durability = very durable ( 8 )
     
    Last edited: Nov 25, 2012
  19. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    Guesses???

    Here's what I have done:
    Shim
    Grease
    AOE correction
    Lonex red motor
    Lonex POM piston head
    Guarder sp100 spring
    9.6v battery

    Here's what I plan to do:
    Wire to deans
    16ga wiring
    NanoFet
    Matrix 16:1 gearset
    Put in a guarder sp110 spring
    Modify o-ring air nozzle
    Matrix reinforced spring guide
    Matrix 7mm bushings
    Swiss cheese piston
    Remove ball bearings from piston head

    1. With this setup I cannot find a guarder sp110 spring right now, do you know which spring from what company will avoid pre engagement but also keep my fps ~ 380. Need help fast!

    2. Is there anything I should change that will increase my rof a bit more? I want to stay under 30 rps
     
  20. jimfc3

    jimfc3 New Member

    28
    0
    evergreen park
    33 rof
    455 fps
    8
    200+
     
    Last edited: Nov 25, 2012