HELP!!! need help with fuse housing

Discussion in 'Gun Building, Modifications & Repairs' started by JAM98, Nov 21, 2012.

  1. JAM98

    JAM98 New Member

    11
    0
    waukesha
    so in my jg g36 hybrid the fuse housing is weird. I had a fuse problem like a year ago and had to get new fuses but they were a bit bigger than the original one. Because of this it broke the plastic because the plastic is cheap. So how do i fix this. Do re wire it or is there a way to get a new holder for the fuse. THANKS FOR ANY HELP
     
  2. guster99

    guster99 New Member

    124
    0
    So I also had this problem in no AK. So it sounds like you have fuses but the plastic broke. What I would do is take the 2 metal connectors and just get rid of the plastic. Then place the fuse inside the metal connectors and wrap in electric tape the should work. If it doesn't post some pictures.
     

  3. guster99

    guster99 New Member

    124
    0
    So just do that then wrap it in electric tape. It should hold it in place.
     

    Attached Files:

  4. BoogerMc

    BoogerMc Airsoft Jedi Master Supporting Member

    4,556
    5
    Akron
    Although this is a quick and cheap fix, it will be an issue if you need to change your fuse in the field. Spend a few bucks and get one of these two items at Radio Shack and install one in place of the original fuse holder.

    http://www.radioshack.com/product/index.jsp?productId=2102784

    [​IMG]

    http://www.radioshack.com/product/index.jsp?productId=2102783

    [​IMG]

    I would reccommend the bottom one as it eliminates the glass fuse; after all, plastic fuses are easier to carry, won't get broke as easy as glass, and glass is on it's way out.
     
  5. JAM98

    JAM98 New Member

    11
    0
    waukesha
    thanks i'll look into the radio shack items and if i don't feel like doing that i'll use the electrical tape