Help with the cyma rpk

Discussion in 'Electric Guns' started by MutherRussiaFTW, Dec 25, 2012.

  1. MutherRussiaFTW

    MutherRussiaFTW New Member

    8
    0
    New Orleans
    I received an Rpk for christmas, and the pistol grip came apart from the gun, i say apart because when i screw the bottom screw in, it never gets fully tight. I also noticed that the top that can be removed to view the spring is very loose. Is there anyway to fix these problems? This was very disappointing, and any help is appreciated, Thanks.
     
  2. viperU7

    viperU7 New Member

    86
    0
    Bakersfield
    Try to find screw that's just a little longer or another one the same size because it may be stripped at the tip. And the reason why your dust over is lose is because it's only held on my the release button. They use to place a metal tube in them to help with that. So if you can find one that should help with that. U could always screw the crew in and tape it grip on or glue it. That's what my brother did with his. Hope this helps you some.