Hey Guys I want to know what i would need to make this gun into a DSG

Airsofter J · 2022-03-02T08:49:29-0500

Airsofter J · 2022-03-02T08:50:09-0500

PLS HELP

leerihai · 2022-03-02T08:52:44-0500

Well first you need a Dsg gear and a Dsg spring, and get a high torque high tpa motor like 25tpa to pull that strong spring, your current motor probably won't work, 40000rpm is too high, also you don't need a expert gate Titan

Airsofter J · 2022-03-02T08:56:26-0500

Could you send me links to those
evike if u can pls

leerihai · 2022-03-02T09:05:36-0500

Airsofter J said:
Could you send me links to those
evike if u can pls

I actually don't use Evike that much so I can't help you there but https://www.evike.com/products/65653/
Asg makes good motor so you can give that a shot, here is your Dsg and Dsg tappet plate https://www.evike.com/products/68457/ and they works with standard 18:1 gears which is what most stock gearbox have and as for your Dsg spring I suggest not going Evike as they are all irregular spring, I don't really trust the design personally and I suggest you to go standard, something like M170 will work

Guges Mk3 · 2022-03-02T09:24:14-0500

Many of those parts will not easily fit on the G&G. Lonex motor...not so good...I hope this isn't your only AEG. It going to be on the table more than in the field.

You are getting in over your head if you buy all that and think you can just "snap" it all together...

Airsofter J · 2022-03-02T09:26:28-0500

idk

Guges Mk3 said:
Many of those parts will not easily fit on the G&G.

You are getting in over your head if you buy all that and think you can just "snap" it all together...

idk i want to mod it just tell me what i need and what would be easyst

Airsofter J · 2022-03-02T09:27:19-0500

leerihai said:
I actually don't use Evike that much so I can't help you there but https://www.evike.com/products/65653/
Asg makes good motor so you can give that a shot, here is your Dsg and Dsg tappet plate https://www.evike.com/products/68457/ and they works with standard 18:1 gears which is what most stock gearbox have and as for your Dsg spring I suggest not going Evike as they are all irregular spring, I don't really trust the design personally and I suggest you to go standard, something like M170 will work

ok just send me links from anywhere

Airsofter J · 2022-03-02T09:29:14-0500

leerihai said:
I actually don't use Evike that much so I can't help you there but https://www.evike.com/products/65653/
Asg makes good motor so you can give that a shot, here is your Dsg and Dsg tappet plate https://www.evike.com/products/68457/ and they works with standard 18:1 gears which is what most stock gearbox have and as for your Dsg spring I suggest not going Evike as they are all irregular spring, I don't really trust the design personally and I suggest you to go standard, something like M170 will work

just as a FYI how much will it cost idk about the price tho
also what would you estimate the specs being even with a gate titan

Airsofter J · 2022-03-02T09:38:38-0500

leerihai said:
Well first you need a Dsg gear and a Dsg spring, and get a high torque high tpa motor like 25tpa to pull that strong spring, your current motor probably won't work, 40000rpm is too high, also you don't need a expert gate Titan

i am getting the gate titan btw on expert

Airsofter J · 2022-03-02T09:40:36-0500

Can you guys also send me links from anywhere so i can get an idea of what these are

Guges Mk3 · 2022-03-02T09:41:00-0500

If you don't know...you are not ready to do any modding.

This isn't a video game gun where you buy parts and just "snap" it in as an upgrade.

Take it in steps.

Buy a boneyard AEG and make it work.

Then buy a DSG Gear set and a heavy spring and make that work in the boneyard AEG.

Until you do this and gain the experience...nothing is going to be easy about making a DSG.

TPA alone means absolutely nothing. That is like saying a vehicle has a V6 Motor...what does that tell you? Nothing really.

How thick is that wire? How strong are the magnets? Does it use bearings or bushings? One brand of HT motor is another brands "stock" motor.

leerihai · 2022-03-02T13:46:36-0500

Airsofter J said:
i am getting the gate titan btw on expert

You can get it if you want to but given your situation you won't need all those fancy things, it work just the same, and even if you have a use for it you can just get other tools to do it for you for a much cheaper price, just a question? Have you tried something like a 13:1 to see if it is enough? Dsg are quite troublesome

leerihai · 2022-03-02T13:50:47-0500

Guges Mk3 said:
If you don't know...you are not ready to do any modding.

This isn't a video game gun where you buy parts and just "snap" it in as an upgrade.

Take it in steps.

Buy a boneyard AEG and make it work.

Then buy a DSG Gear set and a heavy spring and make that work in the boneyard AEG.

Until you do this and gain the experience...nothing is going to be easy about making a DSG.

TPA alone means absolutely nothing. That is like saying a vehicle has a V6 Motor...what does that tell you? Nothing really.

How thick is that wire? How strong are the magnets? Does it use bearings or bushings? One brand of HT motor is another brands "stock" motor.

Looking at his situation I don't think he can fix a boneyard gun even if it is only an Aeg

danerd · 2022-03-02T13:52:05-0500

Most of us here are willing to help, but we will not spoonfeed you the information. Every platform is different, with wild variations in the specs they are made to. As such there is no set parts list we can give you that will work with certainty.

Not to sound rude, but if you are asking "what parts will work", you need to do some serious reading on what exactly a DSG is and how the system functions before you go any further. These are by no means a simple "drop-in"; its a finely-crafted and meticulously hand-tuned machine that will punish you for the slightest mistake or oversight on your part.

There are threads here that discuss DSGs that would help you in your search for information. Heck,(shameless plug) my own thread has a few posts about a DSG I did some years ago, and the one I'm currently working on. I also know you can find information on social media and Reddit to aid you as well.

leerihai · 2022-03-02T14:15:36-0500

Actually I suggest you try 13:1 first if you haven't already did, it is usually plenty enough

Airsofter J · 2022-03-02T14:22:14-0500

leerihai said:
Actually I suggest you try 13:1 first if you haven't already did, it is usually plenty enough

ok thank you i have a friend who knows how to do a DSG i just want the parts pls

mr. potatohead · 2022-03-02T14:47:09-0500

Airsofter J said:
ok thank you i have a friend who knows how to do a DSG i just want the parts pls

Leerihai is referring to an SSG (single sector gear) build lol not a DSG. A basic SSG build could be made up of an ASG 30k boost motor(HT), 13:1 gears (try shs ig), an m120 spring, and a plastic high speed piston(SC). Not to mention the hopup, shimming, bearings, AOE, or even grease. If you're getting into teching look at Legacy's build to high rof setups which is pinned in the gun building forum.

leerihai · 2022-03-02T14:47:19-0500

Airsofter J said:
ok thank you i have a friend who knows how to do a DSG i just want the parts pls

I suggest you ask your friends his recommendation first if he knows how, you can't just slam parts from different companies together and expect it to work, you will waste lot of money,try to stay on the same brand

Airsofter J · 2022-03-02T15:42:45-0500

ok will there be a sufficient decrease in specs with the ssg instead of the DSG

Hey Guys I want to know what i would need to make this gun into a DSG

Top Contributors this Month