HFC M11 Tech

Discussion in 'Gas Powered Guns' started by baklash, May 22, 2021.

  1. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    7,741
    4,494
    Minneapolis
    The original design was inspired by the Japanese, the Japanese were a real stickler for realism...
     
  2. baklash

    baklash Member

    38
    9
    Salinas
    Also realistic is how terrible it is.
     

  3. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    7,741
    4,494
    Minneapolis
    That's because it's a HFC Clone. They are a low end knock off company.
     
  4. baklash

    baklash Member

    38
    9
    Salinas
    The KWA “NS1” is equally as terrible in my experience so far. The issues are weak recoil spring, bad valve knocker design, and complex valve system in the bolt. The KWA NS2 fixes the bolt issue and that’s it
     
  5. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    7,741
    4,494
    Minneapolis
    The J-Spec Valve system was designed for the KSC Gas gun to prevent it from exceeding 300fps in Japan.

    Certain performance characteristics (recoil) are not an issue for Japanese users.
     
    Last edited: Jun 20, 2021
  6. Shadowbane

    Shadowbane Active Member

    265
    32
    Pleasant Hill
    Yes, I have a preference for open bolt.