Hop Up Problum

Discussion in 'Gun Building, Modifications & Repairs' started by cyberdudeterror32, Aug 30, 2012.

  1. cyberdudeterror32

    cyberdudeterror32 New Member

    161
    0
    OK, so I just got through doing a Teflon tape mod on my Vsr-10, I put the hop up back together. But when I go to put it in the outer barrel it won't fit. All the screws are on tight and every thing should be right but it won't fit.
    Any help would be a great help. Thanks
     
  2. dylan484

    dylan484 New Member

    441
    0
    Tifton
    On mine the front screw for the scope rail pushed on the outer barrel making it a tight squeeze check that out
     

  3. cyberdudeterror32

    cyberdudeterror32 New Member

    161
    0
    I took off the outer barrel from the upper receiver.
     
  4. dylan484

    dylan484 New Member

    441
    0
    Tifton
    Feel just inside the outer barrel for a slight bump near a whole. I had to sand mine down a bit