How to make a trinkle charger work with a smart charger?

Discussion in 'General Airsoft Discussion' started by stroop66, Jan 9, 2013.

  1. stroop66

    stroop66 Member

    592
    0
    I had this idea to use my gator clips to charge my scorpion battery through my smart charger. Im not going to do any soldering until my brother gets back into town.

    Any help guys?
     
  2. Thestig

    Thestig Some say... Supporting Member

    1,265
    1
    Colorado Springs and Southern California
    What are you talking about??
     

  3. Flocktime

    Flocktime New Member

    750
    0
    NukeTown
    Doesn't a smart charger trickle charge already? Also confused.
     
  4. stroop66

    stroop66 Member

    592
    0
    Im talking about making the crappy charger work with a smart charger because theres no tamiya plug on the 7.2 mini battery charge.
     
  5. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    Positive to positive negative to negative should work if you use alligator clips
     
  6. stroop66

    stroop66 Member

    592
    0
    how do you tell which is which?
     
  7. Thestig

    Thestig Some say... Supporting Member

    1,265
    1
    Colorado Springs and Southern California
    So what you are saying is you want to use your smart charger on a battery without the correct plug?
     
  8. stroop66

    stroop66 Member

    592
    0
    yes..............................................
     
  9. BoogerMc

    BoogerMc Airsoft Jedi Master Supporting Member

    4,815
    234
    Akron
    Positive is usually the red wire and negative is usually the black wire. However, if you have the plug I suspect you have, you will need to insert something into the contact areas to atach the alligator clips to, I would suggest pieces of paper clips, just make sure they do not touch each other.

    Can you post a picture of the plug and battery so we can be sure?