How to remove the front sight on the CM028A

Discussion in 'Electric Guns' started by AS4E, Nov 15, 2012.

  1. AS4E

    AS4E New Member

    34
    0
    How do you remove the front sight post on the cm028a? I plan on making it a cqb size aeg by removing the sight and picking up a smaller outer barrel and reattaching the front sight right up against the gas piston system.
     
  2. richman992

    richman992 New Member

    1,366
    0
    Rochester
    Step 1: Remove the mock barrel cleaning tool from under the barrel

    Step 2: unscrew the screw under the sight.

    Step 3: pull/twist it off

    I don't think they make a shorter barrel, I had to hacksaw mine down and drill a hole for the screw. But I did the exact same thing, came out looking pretty cool in my opinion.
     

    Attached Files:


  3. AS4E

    AS4E New Member

    34
    0
    Cool! Thanks man. I have one last question. How do you get rid of the mock cleaning tool?
     
  4. richman992

    richman992 New Member

    1,366
    0
    Rochester
    pull it down and out. you gotta pull it down to get it past the little holder under the front sight. But it slides right out. you can even trim it down and put it back in, i just decided i liked how it looked without it.