Ignite m4 viper upgrades?

Discussion in 'General Airsoft Discussion' started by djchavito, Feb 17, 2013.

  1. djchavito

    djchavito New Member

    26
    0
    I have an ignite m4 viper stock and i wanna make some upgrades to increase the fps with a budget of 100-150$ any sugestions?
     
  2. matt011999

    matt011999 New Member

    30
    0
    First off a spring will bring up the fps along with an air nozzle
     

  3. ViennaAirsoft

    ViennaAirsoft New Member

    347
    0
    What kind of fps are you looking to achieve?
    If you have 100-150$ then you can do a lot with your gun
     
  4. soviet

    soviet New Member

    4,120
    0
    Please don't post that. FPS does not mean RANGE or ACCURACY.
     
  5. djchavito

    djchavito New Member

    26
    0
    400-450 FPS would be great. My gun shoot around 340-350 fps with .20 bbs
     
  6. soviet

    soviet New Member

    4,120
    0
    Dude. 340-350 FPS is fine. Get a TBB.
     
  7. bob19922

    bob19922 New Member

    1,203
    0
    Old bridge
    If I were you I would buy a better gun IIRC that gun is something that you get at walmart, which would limit upgrade ability.
     
  8. soviet

    soviet New Member

    4,120
    0
  9. matt011999

    matt011999 New Member

    30
    0
    If you can get benifits from many parts, airnozzle is good for range but also can raise fps a little, mainly get a spring but with that you need a high torque motor if your looking anything greater than an m120
     
  10. ViennaAirsoft

    ViennaAirsoft New Member

    347
    0
    Yeah, asking for 400-450 is a bit much, and would require a lot more upgrading to get to, not to mention, it wont really help you too much. You sound new so this probably isnt the best route.

    Open the gun up, check the compression, fix it if needed, and do r-hop or flat hop. Then yes, TBB if you want but its not totally needed.
     
  11. soviet

    soviet New Member

    4,120
    0
    Please stop talking... A spring? He needs anything besides that first....
     
  12. Zardichar

    Zardichar New Member Supporting Member

    3,379
    0
    NW
    We try so hard...

    What the OP needs to do is post quantitative goals on accuracy, range, and rps.
     
  13. bob19922

    bob19922 New Member

    1,203
    0
    Old bridge
    Ok first off upgrade hop if you want range air nozzle increasing range, lol I have never heard of that. But seriously just get a new gun you have the budget for nice gun for a beginner. You will be a lot happier then you will be with the gun you have now. Also you won't have to hope that your gun can take parts, get a TM spec gun and there is no worrying if a part will work.
     
  14. Zardichar

    Zardichar New Member Supporting Member

    3,379
    0
    NW
    +1. I recommend the Cyma CM.028 AK. It's cheap and built like a tank. Plus its TM compatible.
     
  15. bob19922

    bob19922 New Member

    1,203
    0
    Old bridge
    I love that gun I have the 036 but my friend just bought the 028 and I have to say it runs nicely for a stock gun, it's a great buy for beginner.
     
  16. ViennaAirsoft

    ViennaAirsoft New Member

    347
    0
    His gun is TM compatible, aside from the anti reversal latch. I believe its APS or javelin OEM'd
    Ive seen pics of the gearbox, his gun is fine, just needs some tuning and upgrades.
     
  17. Zardichar

    Zardichar New Member Supporting Member

    3,379
    0
    NW
    It's time for me to leave this thread
     
  18. djchavito

    djchavito New Member

    26
    0
    I think is better get a new gun' its hard to find parts for that ignite here in PR.
     
  19. bob19922

    bob19922 New Member

    1,203
    0
    Old bridge
    No don't leave me I need you!