[Splode]

I STILL am having an IMPOSSIBLE time finding ANYTHING to resemble a high TPA HT motor (22 or more) in short type!
ZCI is discontinued
SHS is 16tpa
JG Blue is MIA
Etc...

Is there such a thing anymore or are short type motors now being ousted/boycotted?

 

[Uller]

No.I think you dont know where to look.Try one of these:https://www.evike.com/products/52190/ I have one of these.Very powerful.Can pull very heavy springs easily.

 

[Guges Mk3]

I have a Tienly GT 30000...Lefse said those are 22TPA...new...Green Model. Also Tienly GT35000 too.

These motors have a speed rating based on a model number starting at 2S, not 3S for other motor makers.

Want to give one a try? 50.00 shipped...yeah they are more expensive...

 

[Splode]

Wouldn't 45000 rpm be a High speed motor, not high torque? Im looking for trigger response over RPS since I'm already getting 25rps with a stock jg crappy motor.

 

[atsnoK]

Lonex a2?

 

[Guges Mk3]

Wouldn't 45000 rpm be a High speed motor, not high torque? Im looking for trigger response over RPS since I'm already getting 25rps with a stock jg crappy motor.

It indeed is a HS motor and it can pull a M120 all day at 25rps on a 2S. It's drop in simple. Key is 2S while yours is a 3S.

Here for the sake of posterity...try the 30K Tienly in short. 40.00 shipped and I am losing money on that. With a 3S I will surmise you will be way over 32rps.

Lonex a2?

Naw...dated, over priced for what you get and not a fast motor. What the Lonex does on a 3S the Tienly does on a 2S for the same price and the Tienly's are long in the tooth now too.

 

[Uller]

ASG U18k.Rated at 28tpa can pull pretty much anything.

 

[Splode]

I have a Tienly GT 30000...Lefse said those are 22TPA...new...Green Model. Also Tienly GT35000 too.

These motors have a speed rating based on a model number starting at 2S, not 3S for other motor makers.

Want to give one a try? 50.00 shipped...yeah they are more expensive...

Which would likely give better trigger response?

 

[Uller]

Wouldn't 45000 rpm be a High speed motor, not high torque? Im looking for trigger response over RPS since I'm already getting 25rps with a stock jg crappy motor.

I have one in an MG build I did.Pulling an M130 spring,and backed by two 5s 1500mah lipos wired in parallel I can get 30rps.

 

[Guges Mk3]

In a legacy set-up with minimal technology enhancements the 30K, but the 35K is a close 200hundreths of a second behind.

For the frame of reference...the Tienly 30K is capable of pulling a M190 on 18:1 at 30,000 rpm on a 2S. The ASG motor is not any near that on a 2S...and requires a 3S to hit the same speed...but surprising...they cost the same.

Splode, want to test it? I really need to know and validate my information...and another tester would be helpful.

 

[Splode]

ASG U18k.Rated at 28tpa can pull pretty much anything.

Might look into that. RPS is kinda moot because the main place I play only allows semi auto. Trigger response is the only direction I can go. Besides, I already get 25 rps with 11.1 lipo and the stock jg motor. That's all I need really.

 

[atsnoK]

Tienly motor stats

 

[atsnoK]

More

 

[atsnoK]

More...

 

[Guges Mk3]

Ummm...who put that together, because the ASG motor is NOT made by Tienly...I was in Taiwan 2 years ago for Hooha and the people running the stall for the ASG unit stated specifically they are NOT Tienly.

Since I still have that factory sample, I may just open them up and compare the internals.

 

[Uller]

More...

This is nice to know.Thanks

 

[atsnoK]

More......

 

[Uller]

Might look into that. RPS is kinda moot because the main place I play only allows semi auto. Trigger response is the only direction I can go. Besides, I already get 25 rps with 11.1 lipo and the stock jg motor. That's all I need really.

I have a couple of these in M150 DMR builds.Very similar torquiness to a Systema Magnum,and alot easier to find.

 

[atsnoK]

Credits go to Pekka Mäki-Kuutti https://pmakiku.pic.fi/blog/57

 

[atsnoK]

More.......

First 2 photos helical motors