Inner barrel vs. cylinder

Discussion in 'Gun Building, Modifications & Repairs' started by xXTacoMcFacoXx, Aug 6, 2012.

  1. xXTacoMcFacoXx

    xXTacoMcFacoXx New Member

    130
    0
    Im looking to put a longer 455mm barrel in my G&G m4 cqb-r but im not sure if it would match well with my cylinder? From what I've read a type 0 is best for 455-509mm barrels.
     
  2. averageairsofter

    averageairsofter New Member

    1,052
    0
    Menifee
    Yes type 0 is the cylinder that you'll want to get.
     

  3. Sparky_D

    Sparky_D Moderator Staff Member Moderator

    11,982
    27
    Pierce County
  4. xXTacoMcFacoXx

    xXTacoMcFacoXx New Member

    130
    0
    Do you know if an aftermarket cylinder would fit well with my stock cylinder head and other parts.
     
  5. Sparky_D

    Sparky_D Moderator Staff Member Moderator

    11,982
    27
    Pierce County
    As long as it's not a bore up cylinder, you'll be fine.
     
  6. xXTacoMcFacoXx

    xXTacoMcFacoXx New Member

    130
    0
  7. xXTacoMcFacoXx

    xXTacoMcFacoXx New Member

    130
    0
    Thanks for all of the info i should be good to go. :)