JG Bar-10 help

Discussion in 'Gun Building, Modifications & Repairs' started by Hartman96, Aug 9, 2012.

  1. Hartman96

    Hartman96 Active Member

    I have just recently descovered that the hopup in my sniper rifle broke, so Im going to upgrade it. But i am unsure what to buy. I've read the guides and such and have compiled a small list. I need to know if these will work as upgrades and if they will fit my gun.

    http://www.evike.com/product_info.php?cPath=24_75_390&products_id=35655 (piston)

    http://www.evike.com/product_info.php?cPath=24_71_372&products_id=37771 (hopup)

    http://www.evike.com/product_info.php?cPath=24_611_612&products_id=35662 (spring)

    What else is needed? I read that a new trigger asembaly is needed but I cannot find one.
  2. Batman

    Batman New Member

    I would get a TM precision hop up unit. There was one circulating around ASF for like $40, they are usually $60 new I think.
    You don't need a new trigger assembly, but eventually you will need to replace the trigger and piston sears to prevent/fix slam firing. Here are some cheap sears http://clandestineairsoft.com/index.php?main_page=index&cPath=1_21

    Sears are always the first thing to upgrade in a sniper rifle, then some kind of hopup/barrel/airseal upgrade, then you should do piston/spring/cylinder etc. There are also plenty of DIY mods to do like cutting the airbrake (increases FPS by about 10-15), teflon bucking and cylinder head, stabilizing barrel, etc


    TYSONtheSNIPER New Member

    Your gonna want new sears. Especially with that spring because in no time your stock ones will break. The sears are part of the trigger assembly, look for a steel first and second sear.
  4. Hartman96

    Hartman96 Active Member

    Thanks for the links and the hopup suggestion. Would the other part be suitable? Im not planning on playing with this gun until I have it usable so im just buying the upgrades right now, not in any particular order.