kart m14 ebr charging handle help

Discussion in 'Gun Building, Modifications & Repairs' started by killjoy1137, Dec 3, 2012.

  1. killjoy1137

    killjoy1137 New Member

    11
    0
    san diego
    kart m14 ebr help bolt catch

    I have a kart m14 ebr that is full metal and the charging handle broke in half. Where can I get a new one and how would I install it? Thanks for the help in advanced.

    Update: Q=What about a bolt catch? I dont see one on my rifle and am wondering where to buy one? Thanks.
     
    Last edited: Dec 22, 2012
  2. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor

  3. Uller

    Uller Active Member

    1,896
    4
    Topeka
    If at all possible get yourself a Cyma M14 charging handle.It will worK,I used a Kart charging handle to repair my Cyma SOC16.

    To keep it from failing again use heavy bearing grease on the brassy looking tube portion of it and glue a button of 80 duro X .25in sorbo to the end of the brassy part so that it doesnt slam into the fake gas tube so hard.
     
  4. killjoy1137

    killjoy1137 New Member

    11
    0
    san diego
  5. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor

    If the charging handle is compatible with the cyma then it will work according to uller. The answers are all here bro.
     
  6. killjoy1137

    killjoy1137 New Member

    11
    0
    san diego
    Sorry I'm only half paying attention most of the time. Thanks
     
  7. killjoy1137

    killjoy1137 New Member

    11
    0
    san diego
    Where should I look to get a bolt catch?