Hi my name's Casey, im from the UK. Will try to keep this as short as possible. I have the Double Eagle M57A L96, am currently in the process of upgrading it. After much deliberation these are the primary upgrades i am going to install, just missing a few more things. I am fairly sure the DoubleEagle M57A is a clone of the UTG MK96 and the WELL MK96. Barrel - (6.03) http://www.redwolfairsoft.com/redwol...arui_SG550.htm Hop - http://www.redwolfairsoft.com/redwol...en_Type_96.htm Barrel Spacers - http://www.airsoftgi.com/product_inf...oducts_id=6745 All I need now is a good bucking and some form of suppressor / flash-hider that would fit the end of the gun and cover the barrel without being far too long. If anyone can advise a good flash suppressor that will cover the extra 4-5cm of barrel without a leaving lots of space for the bb to have to fly dead-perfectly through within the attatchment. Also any good bucking that would work with the PDI hop and this aeg barrel. Also i'm assuming this spacer would fit the gun correctly? Thanks very much [Edit] Found possible flash-breaker - http://www.airsoftatlanta.com/PDI_A_...96_p/66295.htm Looks perfect, will it fit my gun assuming i remove the orange cap?