Lancer Tactical inner barrel size?

Discussion in 'Electric Guns' started by V3A-Ghost, Dec 13, 2012.

  1. V3A-Ghost

    V3A-Ghost New Member

    17
    0
    Chicago
    My friend has a Lancer Tactical m4. Recently, he said that the gearbox jammed somehow and offered me the salvagable parts. I was looking to get a tight bore barrel. So I was wondering, what size is the Lancer Tactical's inner barrels?
     
  2. Leonidas

    Leonidas New Member

    1,442
    0
    Des Moines
    The bore size or length? I'm pretty sure the bore size is 8.9
     

  3. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Not a tightbore that's for sure, get the gearbox or hop up, in the future they may come in handy for parts, tell your friend to sell his stuff here bro, he could probably get at least 20 bucks for that broken thing.
     
  4. V3A-Ghost

    V3A-Ghost New Member

    17
    0
    Chicago
    Sorry, I meant inner diameter.
     
  5. TheAirsoftTech

    TheAirsoftTech New Member

    3,510
    4
    Probably a 6.08mm. But, before buying a barrel, work with the hop-up.
     
  6. Leonidas

    Leonidas New Member

    1,442
    0
    Des Moines
    I'm guessing about an 9.08mm.
     
  7. antizombie

    antizombie New Member

    264
    0
    wausau
    I haven't personnely measured it myslef but they are supposed to be 6.03 inner diameter
     
  8. Nelson

    Nelson Review Guru Supporting Member

    1,277
    0
    Spokane
    Not a chance that they would be 6.03. I would assume 6.08 like I believe someone else already posted.
     
  9. antizombie

    antizombie New Member

    264
    0
    wausau
    I'm sure your right because it was supposed to have a metal hop up and it had a plastic two piece so they lie.............alot
     
  10. Nelson

    Nelson Review Guru Supporting Member

    1,277
    0
    Spokane
    That tends to happen. Correct me if I'm wrong but I thought they had a one piece, clear plastic hop up.
     
  11. antizombie

    antizombie New Member

    264
    0
    wausau
    Whoops yea its a one piece plastic my bad
     
  12. weaps

    weaps Active Member

    1,226
    0
    Brunswick
    The barrel length is 11.437" and the barrel I.D. is .239" which translates to a 6.07-6.075mm barrel I.D.. I check all my barrel I.D.s with delrin plug gages that I turned in .0005" increments. weaps.