Looking for one of these! Please help?

Discussion in 'Electric Guns' started by aya21, Sep 8, 2012.

  1. aya21

    aya21 New Member

    7
    0
    So, I have been trying REALLY hard to find one and just seem to not be able to. I was wondering if anyone knew someone, or somewhere I could get one. Used is fine as long as it works.

    http://shop.ehobbyasia.com/aeg/magpul-gandp-moe-sniper-rifle-limited-edition.html

    Thank you very much. Oh and I don't need any flames on it, or crap about changing my mind. I would like one of them and so I'm only asking for help or leads. Thank you
     
  2. Thestig

    Thestig Some say... Supporting Member

    1,263
    1
    Colorado Springs and Southern California
    That will be hard to find. There are 3 options:
    1) Scour the classifieds for it. All forums. That could take hours.
    2) It is an EhobbyAsia custom, so call them, and see if they will make one similar for you. You might have to pay a lot more for it though.
    3) build it yourself. If you want to take this route, let me know, and I will give you the parts listing later tonight.
     

  3. Thestig

    Thestig Some say... Supporting Member

    1,263
    1
    Colorado Springs and Southern California
    Ok, the OP wanted me to make a list of everything needed for this gun. It is a very rough list, as some of the items put on the gun are out of stock forever, but I feel I have the majority of the items needed for the gun here:
    Base gun:
    http://shop.ehobbyasia.com/aeg/g-p-hong-kong/magpul-licensed-gandp-m4-carbine-moe-aeg-black.html
    Handguard:
    http://shop.ehobbyasia.com/accessor...ifle-length-handguard-for-m4-m16-black-2.html
    Outer Barrel- G&P one no longer made:
    http://shop.ehobbyasia.com/accessor...rel-for-pts-moe-mid-length-handguard-aeg.html
    Magazine:
    http://shop.ehobbyasia.com/magazine...20-mid-cap-magazine-for-m4-m16-aeg-black.html
    Stock: The CTR Battery stock is no longer made, or available anywhere I could find in an hour of searching, but I could find all of the parts to make it look like the correct stock, just without the battery.
    http://shop.ehobbyasia.com/accessories/stocks/aeg/magpul-pts-ctr-stock-for-marui-m4-m16-black.html
    http://shop.ehobbyasia.com/accessories/stocks/aeg/magpul-pts-ctr-rubber-enhanced-buttpad-0-70.html
    http://shop.ehobbyasia.com/accessories/stocks/aeg/magpul-ctr-cheek-riser-1-2-size-2-bk.html
    Bipod: Original one not in stock, this one is very close:
    http://shop.ehobbyasia.com/accessor...l-spring-return-tactical-bipod-12-27inch.html
    The next two items could not be found uin stock on EHA:
    Rail Sling attachment:
    http://www.airsoftgi.com/product_info.php?products_id=7608
    Magpul Handguard Rail Set:
    http://www.evike.com/product_info.php?products_id=30805

    The following could not be found:
    Silencer: Any 285MM CW silencer will work, the specific one could not be found though.
    Scope rings and Scope: I could not find, although the scope should be bought according to the user, not the looks.

    Using EHA, it bings the total out to $550.34, and with shipping to CA, it is around $665
    I believe that is it. Any Questions?
     
    Last edited: Sep 9, 2012
  4. aya21

    aya21 New Member

    7
    0
    Last edited: Sep 9, 2012
  5. Thestig

    Thestig Some say... Supporting Member

    1,263
    1
    Colorado Springs and Southern California
    Theoretically, yes, but you don't want a barrel that long.
     
  6. aya21

    aya21 New Member

    7
    0
    It was more me just seeing if I knew what numbers to look for really. I was thinking 450 would be nice. I prefer to play with a dmr.
     
  7. Thestig

    Thestig Some say... Supporting Member

    1,263
    1
    Colorado Springs and Southern California
    450 is a good length for a DMR.