Mag feeding wrong?

Discussion in 'Gas Powered Guns' started by NOMAD666, Aug 12, 2012.

  1. NOMAD666

    NOMAD666 New Member

    291
    0
    bikini bottom
    Ok so I have three mags two are normal one is extended. The extended one does not feed. The gun does every thing it should but, No bb's shoot out. What should I do? Is it fixable?
     
  2. TheAirsoftTech

    TheAirsoftTech New Member

    3,510
    9
    Did you lube the mag properly?
     

  3. Thestig

    Thestig Some say... Supporting Member

    1,265
    1
    Colorado Springs and Southern California
    Lube it. Also, make sure it is in fully.

    Also, make sure the mag is in the wrong way. Don't laugh. People do that.
     
  4. NOMAD666

    NOMAD666 New Member

    291
    0
    bikini bottom
    The mag is brand spanking new. I lubed it twice cleaned it then lubed it once more
     
  5. TheAirsoftTech

    TheAirsoftTech New Member

    3,510
    9
    Did you over lube it? I don't need to much lube. Too much can cause feeding issues.
     
  6. NOMAD666

    NOMAD666 New Member

    291
    0
    bikini bottom
    I know thats why i cleaned it
     
  7. TheAirsoftTech

    TheAirsoftTech New Member

    3,510
    9
    Ok, hmmmmm, do the bbs look/feel like they have sufficient pressure from the spring in the mag to feed properly?
     
  8. mockingshot

    mockingshot New Member

    1,695
    0
    Return the magazine. Is it a pistol mag? GBB? Aeg?
     
  9. NOMAD666

    NOMAD666 New Member

    291
    0
    bikini bottom
    Its a gbb mag for a glock
     
  10. mockingshot

    mockingshot New Member

    1,695
    0
    Compare the working mag with the non working mag and try to tell by looking down into the mags.
     
  11. NOMAD666

    NOMAD666 New Member

    291
    0
    bikini bottom
    Found out somthing interesting. I noticed the bb in the mag lip was back alot father than the working ones.