Mask fitting help.

Discussion in 'General Accessory Discussion' started by slipknot2302, Jul 24, 2012.

  1. slipknot2302

    slipknot2302 New Member

    481
    0
    Hi, I jut received my mesh face mask, and I have a hard time seeing down the sights with it on. Here is the mask. Thanks.
     

    Attached Files:

  2. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    What gun are you trying to aim with? If it's an AR variant good luck, it's almost impossible with the iron sights and the stock. AKs are possible, sometimes. I can look down the sights of my M14 with a paintball makes no problem.
     

  3. alex

    alex New Member

    4,794
    7
    Atlanta
    scope risers are available in different heights.
     
  4. slipknot2302

    slipknot2302 New Member

    481
    0
    Unfortunately I have an AR. Is there a temporary fix I could use?
     
  5. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    Scope risers. That's all I can think of.
     
  6. slipknot2302

    slipknot2302 New Member

    481
    0
    Alright thanks guys. I'll order some soon here. How would I rise the front sight? Is it even possible?
     
  7. 703

    703 Active Member

    1,975
    7
    webster
    Buy a new set of front and rear sights.
     
  8. Cobom

    Cobom New Member

    482
    0
    Orlando
    Can't you bend those mask a bit to fit your face? If not you can cut it so it covers just your face and no extra mesh.
     
  9. slipknot2302

    slipknot2302 New Member

    481
    0
    That's a good idea. I'll try that. Thanks.
     
  10. Cerveza

    Cerveza New Member

    77
    0
    If you decide to modify your mesh face guard, this video might help.

    [ame=http://www.youtube.com/watch?v=WuGMz1bhIFY&]Youtube Video Link[/ame]