MK18 Highly Upgraded CHEAPPP!!!!

Discussion in 'Sold/Expired Classifieds' started by xoxide, Jun 16, 2015.

  1. xoxide

    xoxide New Member

    79
    0
    Jacksonville
    I built this gun recently, and then decided id rather build a real AR. I will keep it if I cannot get close to what I have in it. It shoots beautifully, less than 2000 rounds through it, never been fielded. Comes with everything you need to shoot it.

    I can make 100 yard shots all day (body shots), dead accurate out to about 100-150 feet. Shoots 34 rps, chronod 437fps on a .20.

    The base gun was a JG M4 CQBR, however just about everything on that has been changed out. Here is a full list of what is on it, along with the prices I paid:
    JG M4 CQBR Enhanced Version- $165
    Internals:
    X high-tech m130 spring- $13
    X high-tech piston- $21
    SHS ball bearing piston head- $16
    Bravo cylinder head= $16
    Prowin hopup unit- $32
    Modify flat hop (hard) bucking- $14
    SHS Barrel (383mm)- $23
    Super Shooter 13:1 gear set- $44
    Magic Box Air nozzle- $12
    Gearbox shimmed
    Air seal mods
    Deans Plugs
    Externals:
    VFC Upper metal receiver- $95
    Echo 1 Platinum Lower Reciever (for VFC)- $70
    Magpul CTR Stock- $25
    Magpul MOE Motor Grip- $22
    Magpul MOE Foregrip- $22
    Daniel Defense (madbull) Free float RIS (10 inch)- $110
    Dream Armory Suppressor- $13
    Magpul MBUS Sights- $28
    PEQ Battery box- $33
    Echo 1 1300MaH 11.1v Lipo - $30
    EOTech 552 Replica Optic- $60
    3x Magnifier- $40
    X6 KWA Polymer Mags- $60
    X2 Hicaps
    X2 Speedloaders
    About 2000 .25 Echo 1 Match bb’s
    All stock parts I have

    Total into Rifle- $965

    $400 plus shipping

    Theres probably some other parts im forgetting as well included.

    [​IMG]
    [​IMG]
    [​IMG]

    FLASHLIGHT NOT INCLUDED
     
  2. rotarepo

    rotarepo New Member

    96
    0
    tampa
    trades?

    Are you taking any trade offers?
     

  3. FlyyeBoy

    FlyyeBoy New Member

    205
    0
    Does the inner barrel go to the end of the suppressor?
     
  4. xoxide

    xoxide New Member

    79
    0
    Jacksonville
    No, about halfway through. Never been an issue though.
     
  5. xoxide

    xoxide New Member

    79
    0
    Jacksonville
    bumping this back up
     
  6. SRT

    SRT Member

    199
    1
    berks county
    Would you do 300 without the magnifier, speed loaders , the high caps and the foregrip?
     
  7. Shotty1

    Shotty1 Member

    102
    0
    Tulsa
    2 things, One is it still up? Two is how big of a pain in the *** would it be to get the rifle down to 350fps, i would need to for cqb play.