Mock silencer

Discussion in 'Gun Building, Modifications & Repairs' started by haden, Nov 15, 2012.

  1. haden

    haden New Member

    14
    0
    How do you install a mad bull sure fire silencer on to a Dboy mk16 if the screw that holds the barrel in place is striped?
     
  2. S1kkguy

    S1kkguy New Member

    489
    2
    London
    Replace the screws?....................
     

  3. haden

    haden New Member

    14
    0
    No I mean they in the barrel an I can't unscrew them.
     
  4. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    Replace the barrel or rip the flashier off in general and then twist the screw out with the same pliers.
     
  5. llvllaRk13

    llvllaRk13 New Member

    48
    0
    What ive done to small stripped screws is i get a small flat tip screwdriver, ( either smaller than the screw head or the same size, aslong as it fits), and hit with a hammer a bit so it dings into the screw and it'll come out like regular.
     
  6. haden

    haden New Member

    14
    0
    Would it damage the threads?
     
  7. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    On the flash hider;) but in all seriousness if the barrel is metal it should be good.
     
  8. haden

    haden New Member

    14
    0
    The barrel threads I mean.
     
  9. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    I know. Is the barrel metal?
     
  10. haden

    haden New Member

    14
    0
    Ya it is its a negative 14mm threading an the 1.5 metric screw that you have to take loose is stripped on top and the wrench can't grip it.
     
  11. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    Then here's what I'd do:

    •rip off the flash hider with pliers
    •twist out the hex screw with the same pliers
    •put your mock suppressor on
     
  12. haden

    haden New Member

    14
    0
    Thanks for the help :)
     
  13. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    No problem! Tell me how it goes!
     
  14. Bulldawg26

    Bulldawg26 Active Member

    1,179
    2
    Atlanta
    Or you could use a dremel tool to cut away the flash hider before removing the set screw.
     
  15. haden

    haden New Member

    14
    0
    It worked out thanks for the advice it worked