Motor springing

Discussion in 'Gun Building, Modifications & Repairs' started by CajunAirsoft, Aug 1, 2012.

  1. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Hey guys I just reassembled my gun ,and my motor won't spring back to me any tips?
     

    Attached Files:

  2. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Hey sorry for the double post ,but Is it this wire?
     

    Attached Files:


  3. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    Did you make sure to put both wires on the same side? Run the red one around the side of pistol grip so it's on the same side as the black one, that's why it's longer.
     
  4. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Yeah I did. It goes all the way down buy wont spring
     
  5. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    What? I couldn't understand that last part.
     
  6. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Yes I have it like that ,but it won't spring. Is that wire in the way. Wow I thought I hit edit sorry for the double. Here is the motor.
     

    Attached Files:

  7. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    I think it might be too tight inside the pistol grip. My motor would stick when it was a little tight. Try playing around with it. It could be that wire, I would push it down more into the GB just in case.
     
  8. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Hey I got it ,but when I shoot there is a site tweaking sound is that bad??
     
  9. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    Adjust your motor height. Your shimming might also be too tight.
     
  10. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Update after I got it to spring once it won't spring now. Even when I loosen it I springs but not enough to let me put on the motor plate.
     
  11. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    I'm stumped. My JG had a similar problem but I just rearranged the wires a few times and it worked.
     
  12. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    I know me too it has never happened like this I don't understand. I got it once erlier.
     
  13. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Hey guys I cannot get my motor to spring here is exactly what my GB looked like hen I opened it after it wouldn't spring.

    Edit:
     

    Attached Files:

    Last edited: Aug 2, 2012
  14. TheAirsoftTech

    TheAirsoftTech New Member

    3,510
    9
    The red wire looks like it could get in the way of the pinion gear...
     
  15. GreenListerine

    GreenListerine New Member

    630
    0
    The wire doesn't look like it should prevent the pinion from entering. Sometimes you just need to work with the motor and wiggle it down. Just keep trying
     
  16. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Okay I got the motor going ,but I had a brain fart and is this the direction this goes in. I didn't put it all the way it is her to get out. It seems like it goes the other way ,but the hole isn't shaped that way.....
     

    Attached Files:

  17. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    I can't tell what that picture is. The motor is supposed to have the red dot towards the trigger, if that's what you're asking.
     
  18. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    That's the little MAg feeder thing I am asking of that is the right direction it goes in.
     

    Attached Files:

  19. Thatguyoverthere1111

    Thatguyoverthere1111 New Member

    4,838
    0
    Mandeville
    Yes, see that little lip coming off of it? That goes under the nozzle.
     
  20. CajunAirsoft

    CajunAirsoft New Member

    413
    0
    Okay that's what I thought it just didn't seem to be right ..