Mythical Tokyo Marui SPAS-12 Short Barrel

Discussion in 'Spring Powered Guns' started by Nineball69, Oct 24, 2021.

  1. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    8,767
    4,884
    Minneapolis
    Opps...I missed that one...
     
  2. richman992

    richman992 Well-Known Member

    1,553
    116
    Rochester
    Late to the party, but man TM should have made a shorty version. My biggest issue with my spas is it’s excessive length. Me and my dremel are getting ideas..
     

  3. Nineball69

    Nineball69 Active Member Lifetime Supporter

    405
    81
    Do it and post results.
     
  4. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    8,767
    4,884
    Minneapolis
    I pipe cutter would be a much better tool.
     
    richman992 and Nineball69 like this.
  5. Nineball69

    Nineball69 Active Member Lifetime Supporter

    405
    81
    Well, I got the SPAS-12 back, and I must say, I am impressed.

    SPAS-12.gif

    They managed to break off the front and rear sights, the choke, and the detent pin for the folding stock, left side. The bolt-handle can almost rotate 360-degrees. The folding stock can just barely hold in place while shouldered...

    These were grown men that I sold this to.

    I cannot perform this mod as a result...Why would a pipe cutter be more effective than a dremel? Those things look like a knife. I'd rather use a hacksaw with a new blade.
     
    Last edited: Oct 30, 2021
  6. richman992

    richman992 Well-Known Member

    1,553
    116
    Rochester
    I believe Guges is referring to one of these:
    IMG_3428.jpg

    They do make much cleaner cuts than a dremel or hacksaw.
     
    Graybeard and aotsukisho like this.
  7. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    8,767
    4,884
    Minneapolis
    And it's perfectly on axis around the OB too...litterally...no "hack" job...
     
  8. Graybeard

    Graybeard Active Member

    143
    54
    Silver Spring
    I picked up a small one at an ACE hardware store for like 10 bucks a few years back for a tent poll project. It’s the perfect size for barrel cutting. I used it to cut the orange protruding tip off my USP to make it look better….now it looks more like the real thing…