Need Help with DMR Build

Discussion in 'Beginners Forum' started by IceLord, Feb 26, 2016.

  1. IceLord

    IceLord New Member

    1
    0
    Hi,

    Im currently Picking parts out for a DMR build I'm hoping I'm going to be able to do in the near future. I wanted a unique look to the rifle so I have been looking at the socom 47 receivers on evike http://www.evike.com/products/44597 and I wanted a internally silenced look and I thought a suppressor would look really cool with this RIS http://www.evike.com/products/41636, but what I needed the help with was the internals for the Gearbox and basically everything techy. The gb I plan on using is a pretty stock CM16 Raiders. The only upgrades I have done to it are that I installed a Magic Box type O Cylinder and a M130 Spring. I would like to know how to flat hop or R hop my hop up unit, What your guy's suggestions would be on Barrel Length and Bore, and what internals I will most likely need to upgrade. I think Im going to need high torque gears and a motor( Correct me if Im wrong) and Im think a 407mm 6.03 barrel. Future Thanks to for all the help
     
    Last edited: Feb 26, 2016