New spring

Discussion in 'Electric Guns' started by Drekavac, Oct 18, 2012.

  1. Drekavac

    Drekavac New Member

    165
    0
    Hi, all. I wanted to change out my G&G cm16 spring for a m110 since i use the gun for field and not CQB. I wanted to know if i need a new motor or spring guide to be able to pull the spring just as if the old spring was in it.
     
  2. MrAirsoft194

    MrAirsoft194 New Member

    233
    0
    A new spring guide is must for longer life span, a new motor for higher rate of fire and trigger response. But real secret for long rang is the hop up unit.
     

  3. Drekavac

    Drekavac New Member

    165
    0
    Aha, so i dont need a new motor? Also, im going to order a new hopup since mine broke. What kind of spring guide would you reccomend?
     
  4. MrAirsoft194

    MrAirsoft194 New Member

    233
    0
    I would recommend a ball bearing spring guide
     
  5. Drekavac

    Drekavac New Member

    165
    0
    Just the spring guide, nothing else then huh?
     
  6. MrAirsoft194

    MrAirsoft194 New Member

    233
    0
    New bushings and air nozzle are great to have. If you can a new piston and piston head.
     
  7. Drekavac

    Drekavac New Member

    165
    0
    Have any reccomendations for bushings, piston, and piston head? Try and keep the cost down, since I am on a bit of a budget.
     
  8. MrAirsoft194

    MrAirsoft194 New Member

    233
    0
    I currently use modify piston head and Shs bushing and piston. It seems to be working.
     
  9. Drekavac

    Drekavac New Member

    165
    0
  10. MrAirsoft194

    MrAirsoft194 New Member

    233
    0