Newcomer

Discussion in 'General Airsoft Discussion' started by Durbin80, Dec 20, 2012.

  1. Durbin80

    Durbin80 New Member

    4
    0
    Staunton
    I'm wanting to buy the dboys m4 aeg but I don't like the bulky peq box is there any way to eliminate that
     
  2. Munishin

    Munishin Well-Known Member

    4,207
    81
    Goodyear
    Buy a new battery and peq box or have the gun wired to the rear.
     

  3. Durbin80

    Durbin80 New Member

    4
    0
    Staunton
    I want to eliminate the peq box completely (no peq box )
     
  4. Munishin

    Munishin Well-Known Member

    4,207
    81
    Goodyear
    Then you can have it wired to the rear or you can try to find a very slim lipo battery that will fit inside the RIS.
     
  5. Havok17

    Havok17 New Member

    1,107
    0
    Chicago
    Now I know you said that you don't want a Peq box but if you want a slimmer Peq box roll with a Peq-15. But you will need either an 11.1v lipo or a 7.4v lipo to fit inside the Peq-15.
     
  6. ncore

    ncore New Member

    1,064
    0
    Pittsburgh
    This. Wiring to the rear is easy, if you don't mind taking the gun apart. If you wire it to the rear, you can get a full stock and have any size battery you want. Heck, you can even take two batteries, wire the blacks together and the reds together and double your mah battery. Best part is, it will fit. I totally recommend wiring to the rear. There is so much space available...
     
  7. bakedant

    bakedant New Member

    55
    0
    Miami
    wired to rear with a crane stock. awesome.
     
  8. Durbin80

    Durbin80 New Member

    4
    0
    Staunton
    Would the nunchuck battery work
     
  9. Munishin

    Munishin Well-Known Member

    4,207
    81
    Goodyear
    In a crane stock yes. In a RIS no depending on how slim it is.