Noveske Custom M4 Build

Discussion in 'Gun Building, Modifications & Repairs' started by OxiClean, Aug 22, 2012.

  1. OxiClean

    OxiClean New Member

    92
    0
    Warren
    I recently ordered a KWA m4 cqbr mod2 rifle with the intent of making it my project gun. I am going to try to throw as many Noveske products on this gun as possible, and to make the gun into a DMR. I have picked out some stuff already, just looking to know of any compatibility issues.

    Base gun: http://www.airsoftgi.com/product_info.php?products_id=10378

    Receiver: http://www.airsoftgi.com/product_info.php?products_id=9380

    My main concern between these next 2 is if they will be compatible.

    RIS: http://www.airsoftgi.com/product_info.php?cPath=284_444_291&products_id=4940

    Outer Barrel: http://www.airsoftgi.com/product_info.php?products_id=8012

    KX3: http://www.airsoftgi.com/product_info.php?products_id=2341

    Inner barrel: http://www.airsoftgi.com/product_info.php?products_id=1232

    Anyone see any problems with these? Suggestions?

    Thanks.
     
  2. EDI1st

    EDI1st New Member

    2,062
    3
    Fountain Valley
    Well.....first mistake is that you didn't ask for what gun to purchase or whoever told you to buy that gun for the build is stupid........

    Issue with KWA is that their internals SUCK big time for what you paid for......

    All of those parts should fit.

    Internal parts to replace:
    Change out the crap 9mm bearings to solid steel bushings.
    Piston
    Piston Head
    Gear Set
    Motor

    Modification
    AoE
    Air Seal
    ER-hop
    Radius GB
     

  3. OxiClean

    OxiClean New Member

    92
    0
    Warren
    Don't worry, I'll be replacing the internals, gearbox and all, soon enough. The only reason I got the gun was because I got it "new" for 40 at a pawn shop. Standard KWA stuff'll be fine till I get the externals done.
     
  4. spazzticsmurff

    spazzticsmurff Member

    677
    0
    phoenix
    I'll edit this later when I'm not on my phone, but for now I got this for you.

    The receiver that you want, at least the upper, is not compatible with the kwa gb. The reinforcements that are part of the front of the 2gx will not let you slide the gb into the upper receiver.
     
  5. OxiClean

    OxiClean New Member

    92
    0
    Warren
    Well that sucks, I guess I'll just install the lower reciever until I get the new gearbox. Thanks for the warning.
     
  6. spazzticsmurff

    spazzticsmurff Member

    677
    0
    phoenix
    sorry to tell you, but without mods the lower probly isnt compatable either.
    i would just say to use that gun as it is and build this other gun you want from scratch since you are replacing 90% of it anyways. that way you can build the gun exactly the way you want it, with less worry about if the things you want to replace the stock parts with will fit.
     
  7. EDI1st

    EDI1st New Member

    2,062
    3
    Fountain Valley
    Or he can just sell the KWA since he bought it for $40.......
    Buy KWA for $40 > ?????? > Profit > Use money to build a new gun > Winning
     
  8. spazzticsmurff

    spazzticsmurff Member

    677
    0
    phoenix
    cant argue with you there. it will help fund the build he wants to do.
     
  9. OxiClean

    OxiClean New Member

    92
    0
    Warren
    Yeah, seems like a better idea every minute. All it needed was to be reshimmed, now it works just fine. Might give/sell it to a friend if they start airsoft.
     
  10. schlabie

    schlabie New Member

    320
    0
    Your going to buy a inner barrel for a ak when its a m4?
     
  11. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    For the most part barrels can be interchanged with any gun.
     
  12. Kmkraft12

    Kmkraft12 New Member

    916
    0
    Gainesville
    You may want to just buy a gearbox shell and all the parts needed to make it then put that into the receiver. You have no need for the extra receiver.
     
  13. spazzticsmurff

    spazzticsmurff Member

    677
    0
    phoenix
    but then he wouldnt have the trademarks he wants.
     
  14. EDI1st

    EDI1st New Member

    2,062
    3
    Fountain Valley
    um...he's saying the KWA receiver would be an extra if he put that 2GX box into the new receiver....
     
  15. OxiClean

    OxiClean New Member

    92
    0
    Warren
    The KWA won't be getting used at all, I'll resell it. I'm just going to build it from a 9mm bearings gearbox probably, then add on the reciever, grab a pistol grip and the barrels. Then I'll put on a magpul UBR and the RIS.

    Whoever asked about the AK barrel, the noveske barrel is the length of an ak, between the length of and m4 and m16.
     
  16. Kmkraft12

    Kmkraft12 New Member

    916
    0
    Gainesville
    In other words rather than buy a gun an add to it. Build a gearbox from scratch and te gun from scratch.
     
  17. Mystery43_4

    Mystery43_4 New Member

    1,307
    1
    Santa Barbara
    If you're going to build a new rifle, don't go with a 9mm shell. There aren't any good bushings or bearings out for them.

    8mm would be a better choice if you want bearings. Any size <9 will work if you want bushings. (I only run bushings)
     
  18. EDI1st

    EDI1st New Member

    2,062
    3
    Fountain Valley
    Modify solid steel bushings or their ceramic bearings, literally the hardest balls in the market :p
     
  19. OxiClean

    OxiClean New Member

    92
    0
    Warren
  20. rich635

    rich635 New Member

    1,459
    0
    Los Angeles
    The G&P box is good. However, if you can find one, a Lonex/Bravo gearbox is the best complete box from what I've heard. Wow, this is the first non-staging area/general airsoft post I've made in a while, because NOVESKE. Good luck!