Plates

Discussion in 'General Airsoft Discussion' started by chineseairsofterss, Sep 2, 2012.

  1. chineseairsofterss

    chineseairsofterss New Member

    755
    0
    I cant remember there exact name I think its like Sappy plate or something, but does anyone know where I can get a cheap pair for my USMC CIRAS VEST.

    And would that help my vest with fitting me more tightly because, my vest is a bit loose on me and i put everything on the smallest.
     
  2. UrGirlfriendz

    UrGirlfriendz New Member

    2,039
    1
    Bridgewater

  3. Dead Eye

    Dead Eye New Member

    473
    0
    Ocala
    Make them! not all that hard to do. you can use a couple layers of 3mm open cell pvc sheeting (otherwise known and sintra) you can easily cut the m with a dremel and shape using boiling water. then layer and glue them together to get them around 6mm thick, or more if you want. but 6mm should be close enough. you should be able to get the sheets from a local sign shop for about $25-$35 for an 4'X8' sheet. plenty to build at least 6-8 of them.
    but honestly they are really pointless in airsoft.
     
    Last edited: Sep 2, 2012
  4. chineseairsofterss

    chineseairsofterss New Member

    755
    0
    Yeh, I just need my vest to be more rigid thanks.