Post your last purchase.

Discussion in 'Staging Area' started by Sneaky, Jun 20, 2011.

  1. gunnerk19

    gunnerk19 Active Member

    674
    162
    Rumford
    Denix M1 Garand non firing replica.

    [​IMG]

    Should be here Saturday. Denix are okay quality, but the finish is off on nearly all model guns they make. I'm shooting for (pun intended) a mid '50's issue International Harvester contract model look like the one below.

    [​IMG]
     
    aotsukisho and yrutimid like this.
  2. pulsipher

    pulsipher New Member

    5
    3
    Dickinson
    Mft stock
     

    Attached Files:

    JHat and yrutimid like this.

  3. gunnerk19

    gunnerk19 Active Member

    674
    162
    Rumford
    Umarex "Signature Series" John Wayne .177 revolver. Weathered finish. I used Mother's polish to bring out the steel look to it.

    [​IMG]
    [​IMG]
    [​IMG]

    And got a Rio Bravo style holster for it (before I actually had the pistol in hand).
    [​IMG]

    Fun fact: Umarex doesn't know how to measure revolver barrel lengths. The gun is stated to have a 4 1/2" barrel, the holster is made to fit revolvers with up to 4 3/4" barrels.
    [​IMG]

    The actual barrel length is 5 1/4 inches.
    [​IMG]

    Imagine my surprise.
     
    Last edited: Jun 9, 2020
    yrutimid, Chow and aotsukisho like this.
  4. Gunkid

    Gunkid New Member

    26
    6
    KENDALLVILLE
  5. Guges Mk3

    Guges Mk3 Well-Known Member Supporting Member Lifetime Supporter

    6,159
    3,760
    Minneapolis
    These people who work in these companies knows NOTHING about guns.

    When I worked at CYB...I told them to put out a 100th Anniversary Model for the Thompson for 2017.

    The "Marketing" expert said we cannot do that.. in a French accent, "...it does not happen the 100th Anniversary was in 1911..."...wait, what?
     
  6. LightIsRight

    LightIsRight Well-Known Member

    713
    331
    Cannon Falls
    Whatever that man is smoking, I want some :p
     
  7. Guges Mk3

    Guges Mk3 Well-Known Member Supporting Member Lifetime Supporter

    6,159
    3,760
    Minneapolis
    It was a "lady".

    This was her idea too.
     

    Attached Files:

  8. OPairoft

    OPairoft Active Member

    110
    32
    Bend
    IMG_4208.jpg IMG_4209.jpg

    So, um, I think I have a serious problem...

    Got this all for $375, retail is $1,935.
    The red tape evos have a mosfet problem and two of the 13 midcaps need spring replacements.
     
    -Spitfire-, link0, yrutimid and 3 others like this.
  9. brokenarrow

    brokenarrow Well-Known Member

    6,486
    556
    Meadville
    That’s glorious!

    I’ve bought nothing haha! Hoping that changes in a few months to the tune of $94k
     
  10. Guges Mk3

    Guges Mk3 Well-Known Member Supporting Member Lifetime Supporter

    6,159
    3,760
    Minneapolis
  11. brokenarrow

    brokenarrow Well-Known Member

    6,486
    556
    Meadville
    *le doge intensifies*
     
  12. aotsukisho

    aotsukisho Active Member

    378
    201
    Amazing

    1. Distributor-only, non-transferable warranty, ok

    2. Wait they deduct value based on depreciation?

    3. Lol three months for the battery but does not cover capacity loss or accidental damage? How else exactly do batteries require replacement?

    etc. Your warranty is voided by doing your own maintenance, upgrading parts, or having non-Cybergun attachments any time in the first five years, and still won't cover the battery wear and tear over that time?

    Weird

    102423704_255239215901855_6220980235052440410_n.jpg
     
    -Spitfire-, brokenarrow and yrutimid like this.
  13. gunnerk19

    gunnerk19 Active Member

    674
    162
    Rumford
    3D printed Obi Wan Kenobi lightsaber from Star Wars: A New Hope.

    [​IMG]
     
    link0, yrutimid and aotsukisho like this.
  14. ma_airsoft

    ma_airsoft Well-Known Member Supporting Member

    1,197
    70
    RNVGs with Elbit White Phosphor Tubes
     
    yrutimid and JHat like this.
  15. SubShredder

    SubShredder New Member

    13
    4
    Mulberry
    I bought a OneTigris Scream mesh mask, and Valken Sierra full seal goggles for airsoft. Almost ready to play. Just want a gun, BB's, Mags, Batteries, and a chest rig.
     
  16. brokenarrow

    brokenarrow Well-Known Member

    6,486
    556
    Meadville
    A KYWI pouch 2+1
     
    JHat likes this.
  17. brokenarrow

    brokenarrow Well-Known Member

    6,486
    556
    Meadville
    And now an A&K SR25
     
  18. link0

    link0 Well-Known Member

    1,344
    1,087
    SF Bay Area
    Looks great. There is quite a bit of ghosting on the lettering though. Might want to slow down the printing for that section to get rid of the ghosting.
     
  19. Chairsofter3D

    Chairsofter3D Member

    55
    16
    Montville
    King Arms M16a3 in good overall condition. Bucking seems to be worn out but came pre dean's wired, older neo motor, and they left an 11.1 inside on accident. Got from local shop for 170$ before tax, purchased under the nose of an older man who was haggling, badly with the store. Who then filed complaint with management after they sold it to me and not him ( he wanted a free $40 lipo charger with it too ) IMG_20200705_214524_108.jpeg
     
  20. gunnerk19

    gunnerk19 Active Member

    674
    162
    Rumford
    Got it from a seller on Etsy, came printed that way.