Project CM, first real build I've ever done.

Discussion in 'Gun Building, Modifications & Repairs' started by Devgru98, Sep 6, 2012.

  1. Devgru98

    Devgru98 New Member Supporting Member

    1,821
    0
    Polo
    Alright all, need some advice! I'm doing my first real build (other than doing standard stuff and externals) this time I'm going all out! Base gun is going to be a CM. Still haven't decided on front or rear wired, I have been doing some reading up on this, I'd like some advice anyway. I will post some parts I had in mind later.. I can't decide between doing a front wired magpul, or rear wired with a longer outer/inner barrel.
     
  2. Protectionperfection

    Protectionperfection New Member

    3,292
    1
    Worcester
    rear wired with a buffertube lipo is easy to do and cleaner. If you run front wired, you have to either have a mock peq or a pull apart the handguard every time.
    I would recommend the buffer 7.4 lipo because you can get larger ones that are over 2000mah that will still fit fine.