Quitting Sale: PTW, Glock and more

Discussion in 'Sold/Expired Classifieds' started by Kristofferson_Silverfox, Jun 5, 2015.

  1. Kristofferson_Silverfox

    Kristofferson_Silverfox New Member

    225
    0
    Easley
    PayPal Only, Airsoft Guns Ship to the CONUS Only, Must be 18 or Older to Purchase Airsoft Guns

    If you would like to know shipping costs, please PM me with your zip code​


    2008 Challenge Kit PTW: $855 with PEQ Camera, $800 without
    Gold Cylinder (Last chrono' about 340-350 on .25's)
    Red dot ACOG replica: hood is cracked, lenses are fine, functions as it should
    G&P A2 Flash Hider
    Real KAC Vertical Grip
    Tango Down Style Pistol Grip
    G&P KAC Style rear flip up sight
    ASAP sling plate
    Rear wired to large Tamiya but includes a deans adapter

    The PEQ box is a (formerly) functional FMA PEQ 15 that has been converted into a zoom camera. Inside is a Mobius Action Camera (capable of 720p at 60 FPS or 1080p at 30 FPS) with a 25mm lens. To turn on the camera, you simply press a metal rectangle located just under the rubber button on top of the camera. To turn off, hold the same button for about 3 seconds. The cutouts in the side of the PEQ box allow you to see the recording light to tell whether the camera is on or off and to charge the battery or access the memory card.

    Will come with 9 magazines: 5 Systema Magazines and 4 Vanaras Polymer magazines (the Vanaras internals, unlike the Systema, are held together by glue. I have wrapped tape around some of them where the glue has let go to prevent the internals from separating when loading with BB's). All feed and activate the bolt cutoff.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Function Video of PTW and PEQ Camera
    I switched it to auto at the end of the GoPro footage, but the magazine ran out of ammo before I could take more than 4 shots and activated the bolt cutoff.
    [​IMG]


    KJW G23: $155
    Three magazines, they are scuffed, but there are no leaks and all lock the slide back when empty

    Right handed Blackhawk Serpa Sportster holster (for G19, fits perfectly) with jacketed belt loop (to lower the holster and allow for a smooth draw without interference from a plate carrier), belt mount and paddle mount included but not pictured

    Bladetech kydex dual magazine pouch

    Pistol case is included

    [​IMG]
    [​IMG]


    Emerson MICH 2000(M/L): $30
    Real NVG Base (added to mount a GoPro)
    Replica H Nape (original straps also included
    Originally tan, sprayed green
    [​IMG]
    [​IMG]


    ESS NVG Profile Setup: $35
    ESS NVG Profiles are only intended to protect from airsoft BB's with the Cortex Clip installed. The soft frame usually will allow a BB to pass between the goggles and the wearer's skin. The Cortex Clip solves this problem with creating a hard plastic barrier around the goggles. ESS considers them airsoft safe with the Cortex Clip. I have drilled one small hole (smaller than a BB) in the nose of this cortex clip and attached a mesh mask with zip ties. With this setup, I could still use M4 iron sights and protect my entire face without having the mesh mask pushing against my face.

    Surplus goggle frame
    New replacement lens directly from ESS (used once)
    ESS Cortex Clip
    Mesh Mask (straps have been removed)
    [​IMG]


    Esstac KYWI Shorty (Coyote): $35
    Open top mag pouches with kydex retention, holds M4 magazines, malice clips included
    Condor Gadget Pouch: $7
    Flyye Strobe Pouch (Ranger Green): $7
    Condor Hard Knuckle Gloves: $10
    Plate carrier and admin pouch have been sold
    [​IMG]


    Maxpedition Mini RollyPoly Dump Pouch: $12
    [​IMG]

    More to be added later
     
    Last edited: Jun 29, 2015
  2. Kristofferson_Silverfox

    Kristofferson_Silverfox New Member

    225
    0
    Easley
    G&G Crane Stock, tan, no buffer tube: $10
    [​IMG]
    [​IMG]


    Elite Force 140 Round Midcaps (10 available): SOLD$20SOLD
    Small amount of plastic removed from top to allow feeding in a VFC M16, see picture
    Two have weaker springs but still fed fine in my King Arms M4
    [​IMG]


    Magpul Mag Assists (5.56), 5 Tan, 1 Black: SOLDAll 6 for $14SOLD
    [​IMG]


    Replica Larue FUG: $5
    Larue Trademarks
    Enough storage space for 2 CR123a's
    QD lever is adjustable to fit just about any picatinny rail
    [​IMG]


    GoPro NVG Mount: $25 shipped
    [​IMG]


    Toy Soldier Fake Plates, Size Medium: $25 shipped
    [​IMG]


    Walkies and Headset/PTT: $10
    Headset fits the blue Talkabout
    [​IMG]
     
    Last edited: Jun 29, 2015

  3. EmptyMaG

    EmptyMaG New Member

    12
    0
    I'm a little interested in the Mich, but also wanna see what else you've got.
     
  4. Kopis

    Kopis Active Member

    3,197
    9
    That PEQ is really cool! You could make and sell those for a good profit!
     
  5. Kristofferson_Silverfox

    Kristofferson_Silverfox New Member

    225
    0
    Easley
    Actually, it's currently listed for less than half the price of the parts. I'm not a professional by any means, so I would feel bad trying to profit from my DIY projects.

    I used it in one game, but the game was so uneventful that I just deleted the footage. As soon as it quits raining, I'll try to capture some shooting footage with it to give an idea of how it looks.
     
    Last edited: Jun 5, 2015
  6. Matdx

    Matdx Member

    246
    1
    Newington
    R u interested in any trades for that action camera.
     
  7. Kyvertra

    Kyvertra New Member

    10
    0
    Rozet
    PMed you about buying those mags and magpuls.
     
  8. Seleucus

    Seleucus New Member

    103
    0
    St. Johns
    Subscribing to this thread.
     
  9. Kristofferson_Silverfox

    Kristofferson_Silverfox New Member

    225
    0
    Easley
    Shooting video of PTW added. It also shows the function of the PEQ camera.
    [​IMG]

    My computer doesn't handle video editing well, so the quality is low. You get the idea, though. The footage was taken with one of the Systema magazines and one of the taped Vanaras magazines to show that they will feed and activate the bolt cutoff.
     
    Last edited: Jun 23, 2015