Rail onto gun

Discussion in 'Gun Building, Modifications & Repairs' started by Maxuhmize, Dec 25, 2012.

  1. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
  2. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    I'd venture a guess and say yeah.
     

  3. bal1

    bal1 New Member

    1,366
    0
    The rail appears to be longer than outer barrel,I vote no.
     
  4. Knief

    Knief Moderator Staff Member

    13,850
    3
    Ann Arbor
    It should, but you'll need a rail mounted front sight and you'll probably want a low profile gas block. If you were super cool, you'd drill out your barrel and mount the gas block way forward and grab a long gas tube. But that's unnecessary.

    It's a 12" rail and a 14.5" barrel. Your vote doesn't matter if it's uneducated and based on speculation. Don't post if you don't know.
     
  5. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
  6. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    ...The barrel is 14.5 inches, and the DD rail is 12 inches, he will have to take that front site off and possible the gas block like knief pointed out.
     
  7. Knief

    Knief Moderator Staff Member

    13,850
    3
    Ann Arbor
    This is for an impression? You most likely want the Daniel Defense II rail, rather than the Omega.
     
  8. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    He's doing a Ranger one I believe.
     
  9. Knief

    Knief Moderator Staff Member

    13,850
    3
    Ann Arbor
    Yeah, definitely going to want that DDII rail. I have to say, the 14.5" with the 12" DDII rail is really growing on me. It might have to be my next AR build.
     
  10. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    So you will sell me your 416? But yeah, it's growing on me too.
     
  11. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    Last edited: Dec 25, 2012
  12. Knief

    Knief Moderator Staff Member

    13,850
    3
    Ann Arbor
    What exactly didn't fit on your ICS?
     
  13. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    The barrel was wrong or something and i tried a different outer barrel. Want pics?
     
  14. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Yes....ICS uses TM delta ring, but that's all I can think of different.
     
  15. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    So, it would fit on any other gun besides ICS or TM?
     
  16. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    I never said that was the problem, I don't know if that rail needs the delta ring, but if that is the problem, it would fit on guns beside ICS, TM, SRC, JG, and some echo 1s?
     
  17. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    It needs the delta ring.

    Max, what did your rail system come with?
     
  18. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Then yeah that's likely the problem, KA uses real style delta rings so it will be fine. Also need to rewire to the rear or get a peq.
     
  19. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    This comment is a filler so you can see the picture :p

    image-557263911.jpg
     
  20. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    It fit on my G&G... Everything looks the same.