Rewiring Battery Suggestions

Discussion in 'Electric Guns' started by GrenadeHurler, Feb 10, 2016.

  1. GrenadeHurler

    GrenadeHurler New Member

    152
    0
    Loxahatchee
    Hi I was wondering if there is a great place to rewire the battery to, I know that you can rewire to the rear and also to the front (that's how it is as of today). I see some guns with skeleton stocks (no battery in rear), and a VERY thin free float tactical rail up front (no battery up front). Where are they wiring to? This is a M4 I am talking about
     
  2. Sparky_D

    Sparky_D Moderator Staff Member Moderator

    11,978
    28
    Pierce County
    A lot of M4 users use butterfly lipos in the front rail system or buffer tube lipos or Crane stocks. Some also use external PEQ boxes or battery bags in the field, but leave them off for pictures.

    Never seen a skeleton stock M4, though...
     

  3. Lefse

    Lefse Well-Known Member Supporting Member

    6,228
    1,840
    Another way it's done is with a fake "ready mag" next to the mag well. It's big enough to hold a relatively large battery while looking somewhat discrete. Some "baby" M4's have this battery solution from the factory. It's done this way on my G&G "baby" M4, and the wires are routed behind the fake bolt release button. I removed the fake bolt release button to make room for additional gate wires for a mosfet.
     
  4. GrenadeHurler

    GrenadeHurler New Member

    152
    0
    Loxahatchee
    K thanks I really appreciate the the very fast replies