Sar 10 barrel upgrade

Discussion in 'Gun Building, Modifications & Repairs' started by Southpawlegend, Dec 1, 2012.

  1. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    Installed a airsoft gi vsr 6.03mm <430mm long> into my sar10 and just sighted it in

    image-1280896332.jpg

    Can you see the cinder block?



    image-2243765083.jpg
    How about now?



    image-1417081614.jpg

    Down the scope?



    image-3633394354.jpg

    What about with x7 zoom?



    Can hit that cinder block consistently. the block is exactly 100 paces away.

    Haven't even upgraded the hop up yet :)
     
  2. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    100 paces isn't the greatest form of measure... Measure it with a laser rangefinder or really long tape measure.
     

  3. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    Can I measure one of my paces instead then multiply by 100?
     
  4. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    Sure. It's not going to be all that accurate because of varying step size, but it'll be better than nothing.
     
  5. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    25-30 inches so 25x100 2,500in or 30x100 3,000in / 12 equals what? ??

    So around 200-250 ft??
     

    Attached Files:

    Last edited: Dec 1, 2012
  6. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    Sounds believable actually.
     
  7. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    Any suggestions on a hopup bucking?



    That's actually with .36s too
     
    Last edited: Dec 1, 2012
  8. TYSONtheSNIPER

    TYSONtheSNIPER New Member

    1,939
    3
    Edmonton
    If your planning on sticking with VSR type buckings I would suggest nineball or Firefly. Both are great buckings and trusted by many airsoft snipers.

    http://www.airsoftatlanta.com/Nine-Ball-VSR-10-Hop-Up-Bucking-p/58345.htm

    http://www.Airsoftatlanta.com/Firefly-Hop-Up-Bucking-for-VSR-10-Hard-also-fit-p/63320.htm

    Yeah the prices are a little bit higher then the Angel custom one you linked, but you'll be very happy with them. And when doing work with your hopup don't cheap out, its to important, treat it right.
     
  9. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    Do you know of any hard buckings because the gun is strong
     
  10. TYSONtheSNIPER

    TYSONtheSNIPER New Member

    1,939
    3
    Edmonton
    The ones I linked you are hard...
     
  11. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    I see now I'm gonna order the first one on my next order thank you
     
  12. TYSONtheSNIPER

    TYSONtheSNIPER New Member

    1,939
    3
    Edmonton
    No problem man, that one will do you just fine.
     
  13. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    Do you know of any bipods I could scoop up for this ?
     
  14. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    Are you kidding me? Just go look on ASGI and buy one that fits on the sling bead at the front.
     
  15. Southpawlegend

    Southpawlegend New Member

    1,416
    0
    Salisbury
    I don't know what kind of swivel I have or if they're universal. I don't wanna grab one and find out it doesn't fit
     
  16. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    They're universal unless you have off spec crap.... Google.com is a great resource. Consider using it so I don't have to pull my hair out so often in frustration. :p