Siegetek Ver.2&3 Cyclone Revolution Gear Set help

Discussion in 'Gun Building, Modifications & Repairs' started by ArielNechemia, Nov 25, 2012.

  1. ArielNechemia

    ArielNechemia New Member

    140
    0
    Hey everybody, i have a question about the double cycle gears. On airsoftgi it says that i should not use a barrel longer than 363mm, what happens if i do? And is it ok if i use a longer barrel but go on semi?
     
  2. IHOP

    IHOP New Member

    5,426
    2
    Rockton
    The DSG causes the piston to only travel back halfway, cutting the cylinder volume in half. If you use a barrel longer than 363mm, it will be under volumed for the length of barrel and you will see a reduction in velocity and BB acceleration. Using semi has nothing to do with it.
     

  3. ArielNechemia

    ArielNechemia New Member

    140
    0
    So if i use a barrel longer than 363mm then the FPS will start to drop alot more?

    (I am sorry I am kind of new to teching)
     
  4. Col1500

    Col1500 New Member

    815
    0
    Kent
    Yes, and you'll have horrible accuracy because your barrel will become a partial vacuum :)
     
  5. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    You'll be spitting bb's more then anything. Accuracy will be horrible. Fps dropping to nothing in full auto. And maybe even hiccups of bb's from the barrel.