Silicone oil on nonblowback aeg

Discussion in 'Electric Guns' started by Flapjack, Dec 11, 2012.

  1. Flapjack

    Flapjack New Member

    32
    0
    Wilmington
    Hi I know I am stupid for asking this but do you need to put silicone oil on parts of a nonblowback aeg if you do what parts
     
  2. Defcon5

    Defcon5 New Member

    362
    0
    You could always use it to clean out the barrel. Get an unjamming rod, put a piece of Paper towel in the rod and spray the piece with a little bit of silicon oil. After cleaning, put a dry paper towlel in its place.
     

  3. Maxuhmize

    Maxuhmize Active Member

    5,460
    0
    OKC
    I don't recommend paper towel just because it could leave a lot of residue. I would say a ripped up white t-shirt for both the wet part and dried.
     
  4. Defcon5

    Defcon5 New Member

    362
    0
    Yes. Disregard my saying of paper towels and such. An old t-shirt will works 100x better.
     
  5. Flapjack

    Flapjack New Member

    32
    0
    Wilmington
    Thanks guys for your help
     
  6. Maxuhmize

    Maxuhmize Active Member

    5,460
    0
    OKC
    No problem man. Be sure to tell us if there is any significant differences.