Speedman's KC02

Discussion in 'Gas Powered Guns' started by SSGSPEEDMAN, Aug 11, 2012.

  1. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    Just wanted to share my newest project.
    I want to say dont use Falcon blue bucking its horrible. As I speak I'm having Falcon making me a kc02 bucking of 75* and 85*. Not sure when I will get I will get it. As of now with the RA Tech H style bucking I'm getting a flat shot to 263ft.
    here is the ghillie sock I made. Add me on FB, pics there are much better to see.
    http://www.facebook.com/?ref=logo#!/kevin.williamson.315
    So far as $ wise I got $850 in it. If you want to convert to HPA, PM me and I'll set you up with what needs to be done to make HPA Rig.
    Enjoy hope you like it.

    Specs:
    Ra tech:
    6.01 TBB, 510mm
    steel bolt
    steel charge handle
    mag release
    hopup bucking

    Tactical Specialist Custom:
    Renforced steel:
    fire pin, disconnector & guide bead
    trigger&sear
    hammer & hammer strut
    Piston

    HPA KC02 build
    BTW Dont use the Silicon Spray! Use GHK Silicone Drops from Evike, or some Silicone for rc car shocks.
    [ame]http://www.youtube.com/watch?v=bezxa5o5Z-4[/ame]



    Chronoing with .40s FPS is very consisten.
    [ame]http://www.youtube.com/watch?v=J4vba0J_vHo[/ame]


    Shooting 300ft
    [ame]http://www.youtube.com/watch?v=FnGknTjTN0A[/ame]
     
  2. Grudge

    Grudge New Member

    959
    0
    Winnipeg
    Two of my team mates have KC02's and they kick butt! They totally outdistanced everything on the field today!
     

  3. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    they have any upgrades in there kc02s?
     
  4. Grudge

    Grudge New Member

    959
    0
    Winnipeg
    Nope. One guy is looking at getting an NPAS to help keep his FPS within the field limits!

    With the FPS you are getting they would never be able to game them.

    Our field limits you to 400 FPS with AEG and 450 for sniper rifle. And that is on .2's

    Your FPS is 685 on .2's. Not a single field in my are would allow that. They wouldn't even allow a guy to use a 485 (on .2) gun even if he promised to only shoot semi!
     
  5. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
     
    Last edited: Aug 16, 2012
  6. Grudge

    Grudge New Member

    959
    0
    Winnipeg
    Not on our fields. We have quite a few guys that are major snipers and they chrono under 400 FPS.

    There is some effort to move up to a certification program that would allow you to use above 450 but not over 500 (with a .2).
     
  7. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    400fps? might as well just be a DMR
     
  8. Grudge

    Grudge New Member

    959
    0
    Winnipeg
    Everyone is entitled to an opinion. Just stating the facts that we work with on our fields!
     
  9. Sharp

    Sharp Member

    668
    1
    Waukesha
    R-hop that thing, at 600fps you should easily be able to knocking people at 450ft.
     
  10. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
  11. Sharp

    Sharp Member

    668
    1
    Waukesha
    It's still do-able, I've done it to my TM Five-seveN (which has an open window barrel as well). You just need to radius the rear edge a bit to balance the patch.

    Definitely worth it and do-able (though I don't have the proper tools and just had a buddy do it for me), my Five-seveN could already outrange most AEGs in the first place but now it's slinging .28s way farther than I'd ever need my sidearm to. IR hop I hear is better for gas guns though due to cooldown, never really got around to trying but it'd make sense.
     
  12. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    what does this mean?
    need to radius the rear edge a bit to balance the patch.
     
  13. Sharp

    Sharp Member

    668
    1
    Waukesha
    Shaving/filing/sanding the edge to let the patch sit flush and properly.
     
  14. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    If you want to upgrade your trigger,
    these are all the trigger parts of the trigger you will need.
    Note: some shimming had to be done. Where the pin thats goes through hammer. just a couple of washers will work.
    http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Other_WA_M4_Parts_TSC_CNC_Steel_Re inforced_Fire_Pin_Disconnector_Guide_Bead_For_KJ_K C02.htm

    http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Hammers_and_Triggers_TSC_CNC_Steel _Reinforced_Hammer_Hammer_Strut_For_KJ_KC02.htm

    http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Hammers_and_Triggers_TSC_CNC_Steel _Reinforced_Trigger_Sear_For_KJ_KC02.htm


    NOTE: the o-ring thats comes with the piston isn't big enough to fit the inside the cylinder. go to grainger tools and buy this o-ring. p/n5JJR4 or 110 Buna O-Ring. its a tight fit at first,but works a whole lot better

    http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Pistons_and_Cylinders_TSC_CNC_Stee l_Reinforced_Piston_For_KJ_KC02.htm
     
  15. redyp

    redyp Member

    45
    5
    Can u list the parts you will need to make a HPA rig?
     
  16. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
  17. SubSnake

    SubSnake New Member

    491
    0
    Applied this setup to my M4 mags. All I need is the regulator now. Very excited. :D Thanks Speedman.
     

    Attached Files:

  18. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    You are welcome happy to help