[Guges Mk3]

Mini-Mitre. When not cutting .223 Casings for 300BLK.

It cuts bits for Airsoft nicely...granted it's not steel.

https://www.amazon.com/Trademark-To...F8&qid=1535478322&sr=1-17&keywords=mini+mitre

 

[Guges Mk3]

Yeah, perhaps early KP13 slide or a variant.

How much did you pay for this mystery box and where did you buy it from?

 

[Guges Mk3]

Must be a prototype.

So they dumped their junk for 50.00 shipped.

If you want a mystery box...I'll give you a mystery box...but mine would be in the 150 range, but you can specify what you want.

 

[Guges Mk3]

Now I "faintly" remember that pile of CO2 mess...it lost me at CO2...

 

[Guges Mk3]

I think trying to make that slide work would be more than it's worth.

 

[Guges Mk3]

Who made a PDW90 frame?

 

[Guges Mk3]

That just looks like a "normal" P90

-SF- are you looking for the COD variant?

 

[Guges Mk3]

My contacts at G&G is not deep, I maybe able to dig up a "whole" unit...but not a frame only situation.

 

[Guges Mk3]

That trigger is a whole system, not something you can just "swap"...like the AUG trigger.

 

[Guges Mk3]

Sorry...got mixed up. P90 has selector, not like the AUG with a progressive trigger.

 

[Guges Mk3]

Yes, you are right still not thinking clearly...

How does this Trigger kit work? Because last I saw the KA, CYMA, TM, G&G, CA P90 was not universal in "trigger" design.

 

[Guges Mk3]

No they are made in China...there are two models.

One with Caliber markings and one without.

We have been moving those items from MN since last fall.

 

[Guges Mk3]

That GBB has an item that I had a hand in directly. Well, the decision on how it's made...it still kind of gives me a giggle that things I assisted in are still around.

That trigger adjustment is slim and none.

 

[Guges Mk3]

Actually the slide.

 

[Guges Mk3]

For the Screw...take a Die cutter and cut a slot in it. Then use a big flat head and torque it off with a bit of heat applied to the screw via a soldering iron just in case there is some "adhesive" on the thread.

The .45ACP... was my idea to put on the slide after the Spartan logo was nixed. I was the one to have it painted on the Spartan KJW's back 3 years ago to discern it from other KJW GBB's

The Marketing Director at the time, asked what does that mean? Yes, he was that gun stupid.

Spartan STS-5

https://www.airsoftgi.com/product/Spartan-STS-5-Hi-Capa-GBB-Airsoft-Pistol-Black-30192/

It was supposed to has a laser etched slide like one of these:

But the stupids in power over rode my attempted design ideas...so all I could really do to make ours "different" was to have the .45ACP put on. And to this day...I can pick it out from a plethora of other KJW products...

 

[Guges Mk3]

That slide set is NOT unique to Spartan. It's just a plain KJW slide in TAN, which is in it's own form very rare.

Both of the Tan prototypes are laser etched. But, Sales wanted higher margins so the minimalist approach was applied to save 3.92.

 

[Guges Mk3]

Welcome back Spitfire.

I play World of Warships with a bunch of former Marines...

 

[Guges Mk3]

Golden Boi...more Propaganda items from the "existing" suppliers...and not very good suppliers too boot...

 

[Guges Mk3]

Looks like RD just bought general industry extension springs and are just selling them for tappet use...not ideal...could the geometry be retarding proper motion?

Having you considered mcmaster-carr?

 

[Guges Mk3]

What about the MAG 170's?