TM Mk 23 LAM

Discussion in 'Gun Building, Modifications & Repairs' started by CplFlores, Aug 15, 2012.

  1. CplFlores

    CplFlores New Member

    443
    0
    Hello! I am in the process of building a custom LAM for my Marui Mk23. I already have te laser diode, but waiting to wire it. I dunno if I should have an independent power source for it, or tap into the 3 AAA that powers the flashlight. For the flashlight, I was thinking about grabbing a maglite
    xl50 and use the led bulb in it. I just don't know whether I am going to need resistors for both, or just leave the flashlight alone. Also about the laser diode. Should I also have an independent switch, or tie it in with the bottom on/off switch of the LAM unit itself? Any electronic whiz advice would certainly be appreciated!
     
  2. bobalini

    bobalini New Member

    97
    0
    Thousand Oaks
    This has been done several times over by different people do some research and you'll find out how others did it.
     

  3. CplFlores

    CplFlores New Member

    443
    0
    Got it to work, but it is not entirely accurate... Oh well... A laser is a laser on a LAM. A novelty item for me. Thanks for replying!