Airsoft Forum banner

Trigger Response

1514 Views 13 Replies 7 Participants Last post by  OutlawAirsoft
alright so my mk18 has a gate titan and shs gears/piston assembly. my trigger response is imo really good BUT I've seen guys talks about ss'ing they're gear teeth and piston teeth. what's the benefit? is it enough of a benefit to do it to my gun or would I be destroying quality gears?
1 - 2 of 14 Posts
Short stroking a build by one tooth will knock off around 15 FPS. Unless you want the lower FPS, short stroking would not be worth the nano-second quicker trigger response. Ultimately, you are just shortening the distance the piston travels by approximately 2mm. As autsukisho and Splode said, the main use of short stroking is dropping a high-power build to field legal FPS and preventing premature engagement.
  • Like
Reactions: 1
Thanks, Cybergun.
  • Like
Reactions: 1
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top