[Uller]

Maruzen M1100 three gun custom.I came up with the concept for this one as a gentlemans combat shotgun.After rethinking the end result,I decided on three gun custom.This one is a rarity on this side of the Pacific,not only for the work done to it, but also for its construction.Ths one has the distinction of being an all metal rifle.S&T metal outer barrel and magazine tube,Zeke receiver and trigger guard, Remington M870 Curly Maple stock,Brileys Stoeger mlok handguard,Spitfire Armory fibre optic irons,steel barrel vent rib,and unknown printed enlarged bolt handle.Build pics are in this.The rifle is painted in Duracoat Extreme Tactical Grey, and matte black. album:M1100. Test firing video is here:New video by Michael Wells

 

[Uller]

NE UZI.Quite nearly done with this one.Only thing left to do is turn an inner barrel spacer for the suppressor,and measure it out for a longer inner barrel.Bought this one used from a member of the Heavy Recoil Discord .Being an MP2 variant I wanted it for my German gun collection.I added the fixed stock after refinishing,and painting the hardware I also added the Stormworxs scope mount base with Dig Romeo7S,and IDF railed handguard .

 

[Uller]

VFC G3 gbb.The G3 is my hands down favorite rifle,and I had hoped a manufacturer would someday make a gas version.After VFC announced theirs I jumped right on one. Went it arrived I went all out on it.HK Parts G3 AR stock adapter backplate,with Luth AR precision stock and monopod.Midwest Firearms G3 extended scope mount base,with VISM cantilever and Matrix 10-40x56 mm scope .Midwest Industries G3 MLOK handguard,with GG&G heavy bipod,and HK night sight front sight leaf.Fleming Firearms AR style G3 trigger pack housing with HK Parts ambi selectors,Ergo AR grip,and Butler Creek skeletonized and oversized trigger guard.I reamed out the lower portion of the front sight triple frame to accommodate a 417'outer barrel and Rotex muzzle brake for a convincing HBAR.I also had to relocate the selector detents on the trigger pack housing because the position of the ambi selector lobes was slightly off from a SEF selector.The rifle has been shot with Duracoat Diamond Plate Grey.Inner barrel is an ML CJ 6.01x590 with Decepticon 70 bucking.Fires .4's at 2.28j with a range in excess of 90m's. New video by Michael Wells.

 

[Uller]

KWA MK23 full custom.I originally bought this pistol on this forum yrs ago.When I got it,it had the EVO chamber,A+ bucking,and unknown tbb already installed.Later I completed it.I found a new Mafioso steel slide,and RA steel barrel.The two together are heavy,and this influenced my choice in upgrades.Next I installed a Volante Aurora BBU.These are high power BBU's that is essential IMO to allow this pistol to run with this slide and barrel setup.I also installed Guarder 150% hammer and recoil springs for quick retirn to battery,and consistent hammer strikes.This pistol fires like a rifle,and clocks in at 1.6j with .32's.Range is good at 50m's,and I sometimes use it as a primary.

 

[Uller]

Inokatsu P226.I wanted one of these from the start,but couldnt justify the price new.Later I found an extremely good deal on one and jumped on it.Being built for collectors these are extremely well made,and are built with a high degree of detail.Slide,hammer,trigger,and controls are steel,with the frame being aluminum as the real one is,and is finished to look like Nitron just like the real one.Mechanically these are all KJW,and are as far as I can tell fully upgraded.The previous owner installed an aftermarket inner barrel on this one and ML bucking.I wanted mine to sport a comp,so I added a Guarder stainless outer barrel,and RS comp.I also changed out the grips to Hogue for good measure.The pistol came with six CO2 mags,and to run it you absolutely need them.The slide and springs are so heavy that one CO2 caplet equals one mag.Being an Inokatsu,recoil is extremely strong,and range is very good.These things are to be expected from a collector pistol that might see the occasional plinking session in the backyard.My hope is to change this,and hopefully be able to use propane or MAPP gas in it.

 

[Uller]

CA G3 Countersniper.The last G3 in this thread,and final aeg Im going to post here.This one is the very first custom I ever built 18yrs ago if memory serves.This one was built completely with hand tools,at a time when I had no access to machines.I wanted to give it a monolithic toprail,but the only one I could find was a Nitro VO SAS length rail.Undetoured I decided to stretch it.Using a length of aluminum channel and rail to make up the difference in length,I added both to the Nitro rail.That complete,I shortened,and knecked down a section of M4 barrel and installed it.I made my own Magpul G3 stock adapter by making a template of the back of the G3 back plate, transferring the plate to a piece of 4mm aluminum plate, and cutting a hole in it for the Magpul buffer tube,then drilling for mounting holes.I attached the buffer tube by threading the tube through the backing plate I just made,and brazing the tubes flange to the backing plate.Doing it like this hid the brazing joint I just made, and allows access for GB wiring to the stock.GB was next,and I built for tailored towards chamber is a CA G3/SA58 metal chamber with oring added to help with nozzle seal,taped adjustment wheel,plus Firefly Namatzu spacer added .Inner barrel is a cut and recrowned Prommy 6.03x460 and Prommy purple bucking with shaved off contact patch.Rifle clocks in at 2.5j with 2's,at 28rps if I remember right,and shoots lasers in excess of 90m's.I finished it off with sn Aimpoint replica backed with a Hensoldt 3x magnifier with illumination module,300m KA irons,Magpul rail mounted sling loop,Krinkov muzzle brake,and King Arms G3 Palm shelf motor grip.

 

[Uller]

TM HK45.These are nicely shooting pistols with very good ergonomics.Its a real shame they dont get the recognition they deserve.I installed a Creation barrel and slide set along with Ghost Eye sights on mine.Unbridged PDI barrel and ML bucking finishes it

 

[Graybeard]

I’ll take 2!

 

[interceptor]

Agree, TM HK45 is one of my favorites as well!

 

[Uller]

Agree, TM HK45 is one of my favorites as well!

Being a lefty I have a real appreciation for it and the HK45ct

 

[interceptor]

Being a lefty I have a real appreciation for it and the HK45ct

I'm a righty but the HK45 just feels ergonomically nicer to me than others (looking at you, Glock).

 

[Uller]

Iron Airsoft 416 with Iron Airsoft M302.I got the rifle first to add to my HK collection.The previous owner Americanized it with a Mapul grip,Rainier Arms cocking handle,American stock,and a few other small things.I've slowly been going through it,and reverting it back to an all German rifle.Later found the launcher and added it.This rifle is mechanically a G&P WOC wirh all heat treated parts.That being said,this one is still a work in progress.

 

[Uller]

KSC Triarc Systems G18C.Triarc Systems is a custom pistol manufacturer in Texas.They are famous for their double stack 1911's,but on occasion will make a run of Glocks.KSC acquired the licensing to make this limited edition collectible.

 

[Uller]

KSC TMP fully kitted.I really like these little dudes.They are quite a lot of fun to shoot,and are extremely compact.Plan is to eventually gut it,and upgrade it to System7

 

[Uller]

VFC MP5SD.Yup,believe it or not this is an MP5SD.I'll be it a very custom started out as a gen1.First upgrade was the gen2 outer barrel and chamber,which IMO is absolutely essential to make these Gen1's field able.Outer barrel was re-cut,necked down,and threaded to accept the Vector suppressor.Inside is an ML CJ 6.01x290mm inner barrel with ML Decepticon bucking.Tactical Specialists steel hammer and strut.Bolt consists of Crusader bolt head and cylinder,with Azimuth bolt guides,and Bow Master aluminum loading nozzle.Bolt was polished for smooth cycling.Front sight triple frame was removed,and the center portion of the frame was rounded off qnd straightened by hand.MP5 monolithic toprail was added with cut down front end piece,and reworked by hand to fit correctly.handguard was removed,and backing plates made for Nitro VO MP5 handguard rail sections,so I could use the the barrel shroud louvers as mlok slots.Slither stock was removed from the back plate,and hand made ACR adapter plates were made to allow the back plate to accept the ACR stock.Cocking handle support was removed,and polished,then an HK Parts MP5 extended cocking handle was added.Rifle is finished off with HK rail mounted sights,red dot,and a MAWL.

 

[Graybeard]

I like the Masada stock on there…nice work…

 

[Uller]

I like the Masada stock on there…nice work…

I hear ya.Dimensionally it works pretty well I think.

 

[Uller]

ARES G36 with GHK gbb conversion.A little project I've been messing with off and on.After the conversion the rifle fires fine,though a tad under powered at 1.6j or so with .2's.I just may try a GHK M4 nozzle and G36 to M4 magwell conversion on it.Outside of the rifle is all Ares save for the G&P KV stock,and S&T M302 long grenade.I kept all the original ARES aeg parts so I could convert it back at any time.

 

[interceptor]

How is the scope/red dot on the ARES G36?

 

[Uller]

How is the scope/red dot on the ARES G36?

ARES makes a good scope.The reticle on this one is true to the real thing.Unfortunately there red dots are garbage.So much so that when Ares made the Gen1 Tavor with MARS on it,they had to discontinue the MARS and install scope mount bases on them because they were made so badly.I have a Gen1 Tavor.Eventually it will make it here.