UMP gas carbine

Discussion in 'Gas Powered Guns' started by Uller, May 29, 2020.

  1. Uller

    Uller Well-Known Member

    2,190
    294
    Topeka
    decided to make a UMP into a carbine.Turned out pretty good I think.Added what you see plus removed the suppresor mount,and brazed on a section of threaded outter barrel.The rest was aeg outter barrel sections. Angel Custom 6.01x228 barrel was also installed.I wanted to go longer,but I wasn't able to volumize the inner barrel right. 00000PORTRAIT_00000_BURST20200507132948294.jpeg
     
  2. cetane

    cetane Well-Known Member

    928
    445
    Markham & Stouffville, Ontario, Canada
    Acr stock looks good on it
     

  3. yrutimid

    yrutimid Active Member

    471
    87
    Phoenix
    That’s the nicest ump I have ever seen
     
    FuLL-eFFekT1 likes this.
  4. Uller

    Uller Well-Known Member

    2,190
    294
    Topeka
    I thought so.Problem is the stock sits up a bit higher than the oem one making irons useless.I solved the problem by adding a toprail.
     
  5. Uller

    Uller Well-Known Member

    2,190
    294
    Topeka
    Thank you sir
     
  6. MADR77

    MADR77 Well-Known Member

    1,448
    112
    Boise
    How much modification was required to get that ACR stock on there? Was it as simple as a drop in or did it require use of a dremel? Looks very nice
     
  7. Uller

    Uller Well-Known Member

    2,190
    294
    Topeka
    Actually it was done with an adapter.If you use this stock on this rifle,you will need to add a toprail to use iron sights or sn optic.The top of the stock sits alot higher than the oem,making the oem irons useless.The handguard is actually a USC varrel shroud.Both are 3D printed in nylon made for RS guns.
     
    FuLL-eFFekT1, yrutimid and MADR77 like this.
  8. FuLL-eFFekT1

    FuLL-eFFekT1 Member

    133
    14
    Everett
    Any vids of it shooting?! Looks great.
     
  9. Uller

    Uller Well-Known Member

    2,190
    294
    Topeka
    Not yet,Maybe try to work on one this week