[JAMEZAW9]

Was thinking of fully upgrading the internals of my gun. This is so that my gun can be a sniper/assault rifle. I already have a tight barrel and guarder hop up, but I want to know what upgrades are available for my gun which won't damage my gun in the long term. Also I heard that if I got one thing, I would also have to get another thing etc so the parts don't break.

 

[JG M4 Carbine]

just go to airsoftgi.com and e mail them and u will have your answer

 

[Griffin]

KWA gear box.

SCS nub.

Prometheus tight bore.

Prometheus bucking.

9.6V battery.

Smart Charger.

M120 spring for assault rifle, and M140 or M130 for a DMR (don't try to do a sniper rifle, do a DMR and assault rifle).

-Griffin

 

[Divided Volta]

With an SCS nub I almost guarantee you'll have to replace the hop up unit itself. The stock JG ones probably won't allow you to properly set the SCS.

 

[Griffin]

Volta: He already has a Guarder hop up as he said in this quote below.

Was thinking of fully upgrading the internals of my gun. This is so that my gun can be a sniper/assault rifle. I already have a tight barrel and guarder hop up, but I want to know what upgrades are available for my gun which won't damage my gun in the long term. Also I heard that if I got one thing, I would also have to get another thing etc so the parts don't break.

 

[G36fanatic...]

SCS and buckings are different. SCS pushes on the bucking. I think that's what Volta was talking about.

Version 2 gearboxs are not idea for DMR/sniper roles because you can't upgrade to a spring high enough without cracking the shell after a short time.

The best you can do is M120 or M130 spring with a reinforced shell and a better hop up bucking and SCS nub.

 

[JAMEZAW9]

Thanks

 

[JAMEZAW9]

Sorry, know it's been a while. When you say M120, M130 etc, does that means the bb goes at 120/130 meters per second?

 

[JG M4 Carbine]

no

 

[JAMEZAW9]

So what does a M120 mean, PSI or PDI 200% mean, can someone give me a list of springs and what they mean.
Thanks

 

[G36fanatic...]

Actually, M120 does mean M/S. But when translated back to fps, it comes out to around 390-410fps depending on your compression and the brand of spring.

PDI springs go by percent streangth over a standard TM spring or something similar to that. Wherever you buy the spring from, it should give you a rough estimate of the fps you should expect.

 

[hairyman]

just go to airsoftgi.com and e mail them and u will have your answer

What the hell kind of answer is this,,,,you are either here to help or not at all.

 

[hairyman]

no

No?,,,why are you even posting on these forums,,you are no help whatsoever.

It is clear you don't know what you are talking about halve the time,,i find myself in this situation at times also but instead of giving single word/unhelpful posts or telling people to go somewhere else i take the time to find the answer and give it,,,,,not only does it educate me but it also helps others.