Upgrading my kwa mod2

Discussion in 'Gun Building, Modifications & Repairs' started by KWAUSER, Jan 8, 2013.

  1. KWAUSER

    KWAUSER New Member

    34
    0
    Fayetteville
    I recently bought a kwa mod2 and I want to get it shooting about 350fps at 27-30 bps. I want to upgrade everything I need too, where do you guys think I should start. ( I already ordered an 11.1 lipo)
     
  2. superpirst

    superpirst Member

    156
    0
    Cupertino
    first what kind of lipo did you? 11.1v what c and what mah?

    I would get a lonex a1 red motor, lonex blue or red piston, I think kwa mod2 already shoots at 350 fps so it's fine. Get lonex 13:1 gears OR riot sc 10:1 gears.
    With this, you can be pulling 30+ on your gun. Maybe even more.
     

  3. KWAUSER

    KWAUSER New Member

    34
    0
    Fayetteville
    It's a red tiger 1500mah 20c battery. I really want this gun to run for a long time without anything breaking. I was also thinking about sorbo pads because the gun is just to loud.
     
  4. superpirst

    superpirst Member

    156
    0
    Cupertino
    1500 is pretty small... You should have ran a 2000 or a 2200 battery.
    Also, with a mosfet, you should have got a 25c or 30c for your lipo instead.
    Pulls out more power.

    Sorbo pads are good but I just never like using them. If you upgrade everything correctly, you will get the specs you like on your gun.
     
  5. KWAUSER

    KWAUSER New Member

    34
    0
    Fayetteville
    Thanks for the help:D