vfc 416 gap fix?

Discussion in 'Gun Building, Modifications & Repairs' started by j_patts, Dec 3, 2015.

  1. j_patts

    j_patts New Member

    1
    0
    stockton
    Hello, i am new to the forum and i have a problem with my vfc/ef 416, the upper and lower reciever have a gap near the front above the hk logo, if you shine a light on the other side you can see through it, can someone help me with this problem?
     
  2. Zaryk

    Zaryk Well-Known Member Supporting Member

    2,245
    211
    Southern
    Pics would help out.

    While doing some real steel gunsmithing I learned that some real steel and airsoft guns have gaps from the factory that you cannot do anything about, but does not effect function. My concealed carry pistol has a gap so big you can see straight through the pistol between the slide and frame.
     

  3. mikejosephman

    mikejosephman Moderator Alligator Staff Member Moderator

    6,149
    222
    Medieval England
    Either your front RIS isn't on properly or you got a lemon.