VFC HK 416 problem. Loose BBs

Discussion in 'Electric Guns' started by veendicated, Jun 18, 2015.

  1. veendicated

    veendicated New Member

    16
    0
    Hey guys! I have a problem with my VFC hk416. I bought it 2nd hand with magazine included.So here it goes, I have a magpul 30 round bb capacity magazine and whenever i put it in, it does not load the 30 rounds completely. For example i put in 30 bbs. After firing my gun it still has loose bbs in between the hop up and the magazine. There's always 3-4 bbs that will fall off after i take out the magazine. What could be the culprit of this?
    Your help is highly appreciated!
    Thank you in advance! Cheers!
     
  2. NeoAugAU-3G

    NeoAugAU-3G Active Member

    2,918
    2
    Las Vegas
    Thats normal. There is a tube that leads from mag to hop up, roughly 3 bbs long, before the nozzle can feed a bb in. You are fine.
     

  3. veendicated

    veendicated New Member

    16
    0
    Alright thank you so much!
     
  4. muffinman24752

    muffinman24752 New Member

    9
    0
    Perfectly normal for all airsoft aegs though I would recommend a higher capacity mag
     
  5. Rushin

    Rushin Well-Known Member

    3,920
    32
    Kalamazoo

    There's nothing wrong with realcaps.