1x EdGi Barrel 430mm 6.03 VSR Barrel, Increased Barrel diameters *see below* $110/OBO
1x PDI 430mm 6.01 VSR-10 Barrel, Bar-10 Barrel $85/OBO
1x EdGi Customs VSR-10 Sear Set, Novritsch Sear Set $60/OBO
Descriptions:
EdGi Barrel 430mm 6.03 VSR Barrel
I recently bought two of these barrels for my TM VSR-10, I bought two in order to sell the other here on Ebay and make up for the 50$ shipping fee. This barrel has not had a bucking installed and no bbs have gone through it. This is a100% brand new EdGi 6.03 brass barrel. It has been kept in a PVC pipe in my closet and I can assure you the barrel is straight as it can be.
What is special about this Barrel?
This barrel was a custom order and can be dropped into any VSR-10/Bar-10 variant. The last inch (25.4mm) of this barrel is expanded from 6.03mm to 6.13mm to allow for maximum centering of the BB when it leaves the barrel. I also had the outer diameter expanded to 10mm to further reduce an vibrations after each shot and prevent an bending with time. I have a clone of this barrel install in my VSR and it is hands down the most accurate barrel I have ever used. If you have not heard of EdGi barrel, you can do some research and you will find it is one of the best, if not the best, barrel brands on the market. Each end of the barrel is the standard barrel diameter so you will still be able to house any action army or other brand hop units. If you have any questions feel free to send me a message.
PDI 430mm 6.01 VSR-10 Barrel, Bar-10 Barrel
I recently bought this 2 months ago for my TM VSR-10, but I never got around to installing it and don't have an immediate need for it so I am deciding to sell it so I have money to help go to a MilSim event in September. This barrel has not had a bucking installed and no bbs have gone through it. This is a100% brand new PDI 6.01 stainless steel barrel. It has been kept in a PVC pipe in my closet and I can assure you the barrel is straight as it can be.
EdGi Customs VSR-10 Sear Set, Novritsch Sear Set
If you are looking at these sears then you know they are hands down the strongest sears money can buy. If you didn't know this, feel free to do some more research, if you find some, please message me and fill me in. EdGi customs is notorious for putting out extremely high tolerance and precision crafted and parts for Sniper Rifles. There is no spring I have heard of that this sear set cannot handle (750 fps+ tolerance capabilities). The base cost of this sear set with shipping (from the Philippines) is over $100. May the best offer win.
Reason For Selling:
I decided to stay with my current set up so I never used these sears. I only put the best in my rifles and unfortunately I can only stick to owning one sear set (installed in my other rifle). These sears have NOT been opened from the package so they are BRAND new. I was in the process of doing an entirely new spring sniper build but decided I should hold off, because new builds have a way of making your money disappear faster than I am ready for at the moment.
![Wood Office supplies Tool Composite material Hardwood]()
![Air travel Aircraft Font Wood Aerospace manufacturer]()
![Wood Office supplies Writing implement Pen Writing instrument accessory]()
![Brown Wood Rectangle Beige Flooring]()
![Wood Office supplies Tool Wood stain Rim]()
![Pen Writing implement Office supplies Wood Ball pen]()
![Brown Wood Rectangle Flooring Floor]()
![Wood Household hardware Automotive exterior Metal Rectangle]()
![Rectangle Auto part Font Metal Wood]()
1x PDI 430mm 6.01 VSR-10 Barrel, Bar-10 Barrel $85/OBO
1x EdGi Customs VSR-10 Sear Set, Novritsch Sear Set $60/OBO
Descriptions:
EdGi Barrel 430mm 6.03 VSR Barrel
I recently bought two of these barrels for my TM VSR-10, I bought two in order to sell the other here on Ebay and make up for the 50$ shipping fee. This barrel has not had a bucking installed and no bbs have gone through it. This is a100% brand new EdGi 6.03 brass barrel. It has been kept in a PVC pipe in my closet and I can assure you the barrel is straight as it can be.
What is special about this Barrel?
This barrel was a custom order and can be dropped into any VSR-10/Bar-10 variant. The last inch (25.4mm) of this barrel is expanded from 6.03mm to 6.13mm to allow for maximum centering of the BB when it leaves the barrel. I also had the outer diameter expanded to 10mm to further reduce an vibrations after each shot and prevent an bending with time. I have a clone of this barrel install in my VSR and it is hands down the most accurate barrel I have ever used. If you have not heard of EdGi barrel, you can do some research and you will find it is one of the best, if not the best, barrel brands on the market. Each end of the barrel is the standard barrel diameter so you will still be able to house any action army or other brand hop units. If you have any questions feel free to send me a message.
PDI 430mm 6.01 VSR-10 Barrel, Bar-10 Barrel
I recently bought this 2 months ago for my TM VSR-10, but I never got around to installing it and don't have an immediate need for it so I am deciding to sell it so I have money to help go to a MilSim event in September. This barrel has not had a bucking installed and no bbs have gone through it. This is a100% brand new PDI 6.01 stainless steel barrel. It has been kept in a PVC pipe in my closet and I can assure you the barrel is straight as it can be.
EdGi Customs VSR-10 Sear Set, Novritsch Sear Set
If you are looking at these sears then you know they are hands down the strongest sears money can buy. If you didn't know this, feel free to do some more research, if you find some, please message me and fill me in. EdGi customs is notorious for putting out extremely high tolerance and precision crafted and parts for Sniper Rifles. There is no spring I have heard of that this sear set cannot handle (750 fps+ tolerance capabilities). The base cost of this sear set with shipping (from the Philippines) is over $100. May the best offer win.
Reason For Selling:
I decided to stay with my current set up so I never used these sears. I only put the best in my rifles and unfortunately I can only stick to owning one sear set (installed in my other rifle). These sears have NOT been opened from the package so they are BRAND new. I was in the process of doing an entirely new spring sniper build but decided I should hold off, because new builds have a way of making your money disappear faster than I am ready for at the moment.
