well mb07 hop up assembly.

Discussion in 'Sniper Rifles' started by Phillies2406, Aug 26, 2012.

  1. Phillies2406

    Phillies2406 New Member

    2,677
    0
    How do I remove the hop up assembly from the well mb07. It seems to be the same as the well vsr 10 clone. I plan on fine tuning this hop up.



    ForumRunner_20120826_202426.png



    ForumRunner_20120826_202444.png



    ForumRunner_20120826_202503.png
     
  2. TYSONtheSNIPER

    TYSONtheSNIPER New Member

    1,939
    3
    Edmonton
    Take out both the screws on that block part, one is located under the spring. That will take off the block, then you simply take out the screw on the hop adjustment thing and you will be able to slide the hopup unit and inner barrel out of the receiver once the bolt is also removed.