What brand is this?

Discussion in 'Electric Guns' started by THE_ELIMANATOR, Nov 28, 2012.

  1. THE_ELIMANATOR

    THE_ELIMANATOR New Member

    232
    0
    Hebron
    Hey guys so today I purchased this gun came with like 7500 rounds but my main qeustion is what brand is it?
     

    Attached Files:

  2. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Does it matter? I wouldn't say so, but that runs on a 7.2v battery which kind of implies it's an lpeg, in which case, who cares about the brand?
     

  3. THE_ELIMANATOR

    THE_ELIMANATOR New Member

    232
    0
    Hebron
    Actualy thats not the right battery its supposed to run an 8.4v but the seller sent me the wrong battery.
     
  4. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    It looks to be a JG MP5SD. Any trades or markings on it?

    @Marine, most LPEGS use odd connectors but some don't as I've noticed in the beginning *eek*
     
  5. THE_ELIMANATOR

    THE_ELIMANATOR New Member

    232
    0
    Hebron
    I'll get more close up shots in the morning.
     
  6. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
    Alright. Can you tell from the mag well if its a plastic or metal gearbox? Also, what are the receivers made out of?
     
  7. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    Doesn't look to be a CYMA or JG or... A higher end AEG for that matter.

    Looks to be a CYMA LPEG. If it is, the mp5 mag is plastic. And the top of the mag is flat. Doesn't help that it's surrounded by .12 gram bb's lol

    The connector should be a "large type tamiya" connected to 24-26awg wiring.

    Hopefully I'm wrong and the color in the picture is off or something. I hope it is a higher end AEG mp5sd.
     
  8. Thestig

    Thestig Some say... Supporting Member

    1,263
    1
    Colorado Springs and Southern California
    Something about the trigger and grip area is off... But I can't pick it out.

    Also, the selector switch colors are off. Fire should be red.

    I personally think it is an LPEG. But that is my opinion.
     
  9. THE_ELIMANATOR

    THE_ELIMANATOR New Member

    232
    0
    Hebron
    The magazine is metal and its not flat at the top. Also about the bbs the seller new absolutley nothing about airsoft and bought .11s also they bought .35 metal 6mm bbs and said that metal bbs are good for skrimishes.
     
    Last edited: Nov 29, 2012
  10. Zombiekiller

    Zombiekiller New Member

    15
    0
    Tomball
    prob a jg or cyma branded gun
     
  11. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
  12. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    No the auto fire on the selector is red on the JG, his are white.

    Hmm speaking of which, I don't see any semi auto marking.
    ELMINATOR: Can you fire semi auto with this gun?

    [​IMG]
     
    Last edited: Nov 29, 2012
  13. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,239
    0
    Warrenton
    So... Are you saying its not a Cyma but it looks like its a Cyma? Lol, or are you saying its not a higher end Cyma?
     
  14. Sparky_D

    Sparky_D Moderator Staff Member

    11,980
    16
    Pierce County
  15. Maxuhmize

    Maxuhmize New Member

    5,460
    0
    OKC
  16. Pezturbator

    Pezturbator New Member

    1,584
    0
    Am i the only one who saw this?? Metal 6mm bbs? You should NOT be putting those through.
     
  17. Sparky_D

    Sparky_D Moderator Staff Member

    11,980
    16
    Pierce County
    It came both ways.
    That was the only one I could find a retailer page for.

    The body has the white markings and I've had at least a half dozen cross my bench in the last 6-7 years.

    A picture of the OP's grip base will tell wonders as to brand.
     
  18. THE_ELIMANATOR

    THE_ELIMANATOR New Member

    232
    0
    Hebron
    No I'm not using them there alluminum so I'm just going to recycle them I was just laughing about how they thought they were good for skrimishes.
     
  19. THE_ELIMANATOR

    THE_ELIMANATOR New Member

    232
    0
    Hebron
    This is the grip base reads MADE IN CHINA.
     

    Attached Files:

  20. Pezturbator

    Pezturbator New Member

    1,584
    0
    Aluminum??? What/???