What gun is this???

Discussion in 'Electric Guns' started by llbb010, Dec 5, 2012.

  1. llbb010

    llbb010 New Member

    643
    0
    I'm buying it used and haven't seen it in person YET. If you know the exact gun and have a link it sure would be helpful. The owner doesn't know the name or what it is modeled after. He also doesn't know FPS. But for $50 it seems to me like a steal. :confused: [​IMG]
     
    Last edited: Dec 5, 2012
  2. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Yeah I'm not seeing a picture, try a new one.
     

  3. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
  4. llbb010

    llbb010 New Member

    643
    0
    There I fixed it. Sorry for the inconvenience
     
  5. llbb010

    llbb010 New Member

    643
    0
    Last edited: Dec 5, 2012
  6. Protectionperfection

    Protectionperfection New Member

    3,292
    1
    Worcester
    I honestly believe that is just an mp5 stock... What part is broken exactly?
     
  7. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Close, but not quite mi amigo, the g3 stocks have 2 pins for them, while mp5 stocks only have 1 pin. Except the well g3, that only has 1 pin for the stock as well and is compatible with mp5 stocks.
     
  8. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    Hopefully it's not a springer G3 :/ lol
     
  9. llbb010

    llbb010 New Member

    643
    0
    Notice the duct tape at the rear of the stock where the rubber (recoil pad?) should be.
     
  10. llbb010

    llbb010 New Member

    643
    0
    So then I can only get a g3 stock? Because I've heard the stock is hard for short arms and me being 5' 2" at 13 I think it might be a problem. So what is a shorter option do you know?
     
  11. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    Yes, you'll need a G3 stock.

    And yes again, the full stock might be a little long for you.
     
  12. llbb010

    llbb010 New Member

    643
    0
    Dang, I guess I will look into a stock. Maybe there is such a thing as a shorter stock!?!?
     
  13. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    You can always grab a sliding G3 stock and re-wire the battery to the front for a battery bag

    Or... For a PEQ, since you're looking for a G3 RIS in your other thread.
     
  14. llbb010

    llbb010 New Member

    643
    0
    This will be my first gun, so by that I mean I don't know much technical stuff about airsoft. Is it hard to rewire?
     
  15. brooksburnett5

    brooksburnett5 New Member

    28
    0
    aurora
  16. Protectionperfection

    Protectionperfection New Member

    3,292
    1
    Worcester
    will the stock take the MP5 butt pad?
     
  17. llbb010

    llbb010 New Member

    643
    0
    Good thinking. I think my friend has one I can try. My first war is on Saturday so it's a race against time to hurry and get my gun and fix it up!!!
     
  18. Ehudakineyah

    Ehudakineyah New Member

    2,510
    0
    Mililani
    No it will not take a mp5 butt plate.


    The g3 butt plate is too deep. Where the mp5 is shallow
     
  19. llbb010

    llbb010 New Member

    643
    0
    Well what plate would work? Other than the actual thing. Lol
     
  20. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    Why? It's not like G3 buttplates are expensive.