Which Gun?

Discussion in 'What Gun Should I Get?' started by USOU_Joseph, Aug 30, 2012.

  1. USOU_Joseph

    USOU_Joseph New Member

    10
    0
    I have done some research and found two guns. A G&P M4A1 which is full metal and has a crane stock, but I also found a Matrix M4A1 that is not full metal and does not have a crane stock. But I found a metal body that I can upgrade to. By the way the G&P is 250 and the Matrix is 140+ the metal body. I just need to know what company is more reliable.
     
  2. Mikeinator

    Mikeinator New Member

    345
    0
    Northern VA (no more info, someone might find me...)
    G&G, Matrix "high end" guns aren't high end. Out of those two, go G&G.
    It may be more, but it's worth it (your buying from evike, right?), matrix + metal body is similar in price to G&G, and you can use evike coupon codes to make it around $200.
     

  3. USOU_Joseph

    USOU_Joseph New Member

    10
    0
    Yes I am using evike and the gun is a G&P not a G&G is it still better
     
  4. commando5184

    commando5184 New Member

    291
    0
    1HR north of philly
    G&p by a long shot.....
     
  5. T-BONE

    T-BONE New Member

    5
    0
    What gun should I get I want a custom paint job
     
  6. Archer627

    Archer627 Active Member

    6,182
    16
    Figgington
    G&P beats both G&G and "matrix". Although G&P's internals aren't as good as I would like.
     
  7. T-BONE

    T-BONE New Member

    5
    0
    So where do I get. A custom paint job that looks good
     
  8. Mikeinator

    Mikeinator New Member

    345
    0
    Northern VA (no more info, someone might find me...)
    Sorry, my bad, i misread your first message, either way G&P is far better than Matrix
     
  9. commando5184

    commando5184 New Member

    291
    0
    1HR north of philly
    I have g&g but a lower priced echo 1 would out do mine any day.
     
  10. Archer627

    Archer627 Active Member

    6,182
    16
    Figgington
    You do it yourself, send it to get dipped, or have MutinyBri paint it for you.
     
  11. T-BONE

    T-BONE New Member

    5
    0
    Where do u get a custom paint job
     
  12. Archer627

    Archer627 Active Member

    6,182
    16
    Figgington
    Refer to my post.... Have some patience by the way. This isn't a chat room, it's a forum. Sometimes things take time. -sigh-
     
  13. T-BONE

    T-BONE New Member

    5
    0
    How much money does it cost): by the way I broke my arm today at school it sucks
     
  14. Archer627

    Archer627 Active Member

    6,182
    16
    Figgington
    Why dont you try google? I don't like spoon feeding people information. If you really want a paint job, you'll google it.
     
  15. USOU_Joseph

    USOU_Joseph New Member

    10
    0
    Thanks for all your opinions now all I have to do is save a little more money.
     
  16. Mikeinator

    Mikeinator New Member

    345
    0
    Northern VA (no more info, someone might find me...)
    You can get one with some paint and your own hands, or go to a friend with a steady hand, bottom line is that you make a custom paint job yourself, and don't threadjack danke.
     
  17. USOU_Joseph

    USOU_Joseph New Member

    10
    0
    When I get my G&P M4 I think I might get a rail system. The only problem is that there are so many to choose from. Can someone please tell me which brand is the best.
     
  18. MrGoodkat

    MrGoodkat Active Member

    1,290
    1
    Madbull Daniel Defense replicas are pretty nice, I like this one in particular.
    http://www.evike.com/product_info.php?products_id=32656
     
  19. USOU_Joseph

    USOU_Joseph New Member

    10
    0
    Thanks I'll check it out.
     
  20. Archer627

    Archer627 Active Member

    6,182
    16
    Figgington
    Beware, G&P and madbull threading pitches are different. They vary by .5 something IIRC. You will have to buy a barrel nut for a G&P receiver or Rethread the G&P upper with a madbull DRM.